Утюги Tefal GV7085E0 EXPRESS COMPACT - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
3
Use
Steam ironing
• Place the iron's temperature control dial according to the type of fabric to be
ironed (see table below).
• The thermostat light comes on. Be careful ! The steam generator is ready when
the thermostat light goes out and when the green “steam ready” light stays on.
• While ironing, the light on top of the iron and the steam ready light turn on and
off, as the temperature adjusts without interrupting ironing.
• To obtain steam, press on the steam control button under the iron handle and keep
it pressed -
fig.5
. The steam will stop when you release the button.
• Always spray starch onto the reverse side of the fabric to be ironed.
Setting the temperature
•
Iron temperature setting:
- Start with the fabrics to be ironed at a low temperature (•) and
finish with those which need higher temperatures (••• or Max).
- Mixed fibre fabric: set the ironing temperature to the setting for
the most delicate fabric.
- Woollen garments: press repeatedly on the steam control button -
fig.5
to obtain short bursts of steam, without placing the iron on
the garment itself.
Dry ironing
• Do not press the steam control button under the iron handle.
Vertical steam ironing
• Set the iron temperature control dial to the MAX position.
• Hang the garment on a coat hanger and hold the fabric slightly taut with one hand.
As steam is very hot : never attempt to remove creases from a garment while
it is being worn, always hang garments on a coat hanger.
• Holding the iron in a vertical position, tilted slightly forwards, press repeatedly on the
steam control button -
fig.5
(underneath the iron handle) moving the iron from top
to bottom -
fig.6.
Refilling the water tank
• When the red "water tank empty" light starts flashing, it means that you have no more steam -
fig.16.
The water
tank is empty.
• Unplug the steam generator and open the flap on the tank.
• Pour in untreated tap water up to the max mark -
fig.4.
• Replug the generator. Press the “OK” button on the control panel -
fig.17.
to continue ironing. When the green
light stops flashing, the steam is ready.
Maintenance and cleaning
Cleaning your generator
• Do not use detergent or descaling products for cleaning the soleplate
base-unit.
• Never hold the iron or the base unit under the tap.
• Regularly clean the soleplate with a damp,
non-metallic washing up
pad.
• Clean the plastic parts of the appliance occasionally with a soft cloth.
To prime the steam circuit, either before
using the iron for the first time, or if you
have not used the steam function for a few
minutes, press the steam control button
several times in a row, holding the iron
away from your clothes. This will enable
any cold water to be ejected from the
steam circuit.
Recommendations : for fabrics
other than linen or cotton,
hold the iron a few
centimetres from the garment
to avoid burning the fabric.
Do not place the iron on a metal
support.When taking a break from
ironing, always place the iron on the
iron rest plate of the unit. It is
equipped with non-slip pads and has
been designed to withstand high
temperatures.
EN
DE
FR
NL
ES
PT
IT
DA
NO
SV
FI
TR
EL
PL
CS
SK
HU
SL
RU
UK
HR
RO
ET
LT
LV
T
YPE OF FABRICS
Linen, cotton
Silk
,
Wool, Viskoz
Synthetics
(polyester, acetate, acrylic, polyamide)
SETTING THE TEMPERATURE AND STEAM OUTPUT ACCORDING TO TYPE OF FABRIC TO BE IRONED:
Setting temperature control
1800121480 GV7085 E0 GTK _110x154 01/03/11 11:52 Page3
