Philips HI570/02 - Инструкция по эксплуатации - Страница 13

Electronic safety shut-off function (HI575 only)

The electronic safety shut-off function automatically switches the iron
off if it has not been moved for a while.

C

◗

To indicate that the heating element has been switched off, the
auto-off light will start blinking and you will hear an audible signal.

- In horizontal position, this will happen after 30 seconds.
- In ver tical position, this will happen after 8 minutes.

◗

To let the iron heat up again:

- Pick up the iron or move it slightly.
- The auto-off light goes out and the audible signal stops.
- Put the iron back on its stand. The iron will heat up again.
- When the temperature light has gone on and goes out again, the

iron is ready for use.

Drip stop

This iron is equipped with a drip-stop function to prevent water
dripping out of the soleplate: the iron automatically stops producing
steam when the temperature is too low. When this happens you may
hear a click.

Cleaning and maintenance

After ironing

1

Remove the mains plug from the wall socket and let the iron

cool down.

2

Wipe scale and any other deposits off the soleplate with a

damp cloth and a non-abrasive (liquid) cleaning agent.

To keep the soleplate smooth, you should avoid hard contact with
metal objects. Never use a scouring pad, vinegar or other chemicals to
clean the soleplate.

3

Clean the upper part of the iron with a damp cloth.

4

Regularly rinse the water tank with water. Empty the water

tank after cleaning.

Calc-Clean function

Use the Calc-Clean function once ever y two weeks to remove scale
and impurities from the soleplate. If the water in your area is ver y hard
(i.e. when flakes come out of the soleplate during ironing), you should
use the Calc-Clean function more frequently.

E N G L I S H

1 3