Philips HI570/02 - Инструкция по эксплуатации - Страница 11

C

2

Take the iron from the stand.

3

HI575 only: put the iron back on the stand when the

temperature light starts blinking. This indicates that the iron
has cooled down below the set temperature.

◗

When you stop ironing for a while, always put the iron on the
stand to allow it to heat up again.

◗

When you use the shot-of-steam or turbo-steam function, the
iron may cool down rather quickly. We advise you to iron in
corded mode when using these functions.

Steam ironing

1

Make sure that there is enough water in the water tank.

2

Select the recommended ironing temperature (see section

'Setting the temperature').

3

Put the iron on the stand.

C

4

Put the mains plug in the wall socket.

The iron star ts heating up.

◗

As soon as the water in the water tank is hot enough for steam
ironing, the temperature light goes out.

C

5

Set the steam control to the required position to start steam

ironing.

◗

Steam ironing is only possible at higher ironing temperatures
(temperature settings 

2

to MAX).

◗

Select the recommended steam setting:

B

1 - 2 for moderate steam (temperature settings 

2

)

B

3 - 6 for maximum steam (temperature settings 

3

to MAX)

◗

During steam ironing the temperature light goes on from time to
time. This indicates that the iron is heating up to the set
temperature.

Ironing without steam

◗

To iron without steam, proceed as described for steam ironing but
set the steam control to position 0 (no steam).

1

Select the recommended ironing temperature (see section

'Setting the temperature').

E N G L I S H

1 1

LINEN

HILO

SILK

SEDA

NYLO

N

NILON

WOOL

LANA

COTT

ON

ALGO

DON

M

A

X

M

IN