Philips GC6530/02 - Инструкция по эксплуатации - Страница 8

Fast refill

If the steam tank becomes empty during ironing, follow the procedure below to quickly refill the 

steam tank.

 1 

 Keep the appliance plugged into the mains and make sure the on/off switch is set to ‘I’ (Fig. 4).

 2 

 Press the steam trigger until you no longer hear any steam escaping from the appliance (Fig. 5).

 3 

 To depressurise the steam tank, keep the steam trigger pressed in and slowly unscrew the 

steam tank cap anticlockwise.

Place a piece of cloth over the cap when you unscrew it. Make sure there is no steam left in the 

steam tank. 

 4 

 Remove the mains plug from the wall socket and wait approximately 15 minutes for the 

appliance to cool down.

 5 

 Fill the steam tank as described in section ‘Filling the steam tank’ and let the appliance heat 

up again.
Setting the temperature

Always place the steam tank on a stable, level and horizontal surface. Do not put the steam tank 

on the soft part of the ironing board.

 1 

 Put the iron on the iron stand.

Do not put the hot iron on the supply hose or the mains cord. Make sure the cord does not 

come into contact with the hot soleplate.

 2 

 To set the required ironing temperature, turn the temperature dial to the appropriate 

position (Fig. 6).

Check the laundr y care label for the required ironing temperature:

laundry care table

Symbol on laundry 

care label

Type of fabric

Temperature 

setting

Steam setting 

(GC6540 only)

B

Synthetic fabrics (e.g. acetate, acr ylic, 

viscose, polyamide, polyester) and 

silk

1

 -

C

Wool

2

ECO

D

Cotton, linen

3

 to Max

ECO to 

;

Z

Please note that 

Z

 on the label 

means that the ar ticle cannot be 

ironed.

-

-

If you do not know what kind or kinds of fabric an ar ticle is made of, determine the right ironing 

temperature by ironing a par t that is not visible when you wear or use the ar ticle.

Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent shiny patches.

Star t ironing the ar ticles that require the lowest ironing temperature, such as those made of 

synthetic fibres.

EnGlISh

8