Philips GC3631 - Инструкция по эксплуатации - Страница 15

worldwide guarantee leaflet). If there is no Consumer Care Centre in 

your countr y, go to your local Philips dealer.

troubleshooting

This chapter summarises the most common problems you could 

encounter with the appliance. If you are unable to solve the problem with 

the information below, contact the Consumer Care Centre in your 

countr y. 

Problem

Possible cause

Solution

The iron is 

plugged in, 

but the 

soleplate 

stays cold.

There is a 

connection 

problem.

Check the mains cord, the plug 

and the wall socket.

The temperature 

dial is set to MIN.

Set the temperature dial to the 

required position.

The iron 

does not 

produce any 

steam.

There is not 

enough water in 

the water tank.

Fill the water tank (see chapter 

‘Preparing for use’, section ‘Filling 

the water tank).

The steam control 

is set to position 0. Set the steam control to 

l

 or 

;

(see chapter ‘Preparing for use’, 

table ‘ Temperature and steam 

settings’).

The iron is not hot 

enough and/or the 

drip-stop function 

has been activated.

Set an ironing temperature that is 

suitable for steam ironing ( 

2

 to 

MAX). Put the iron on its heel and 

wait until the temperature light 

goes out before you star t ironing.

EnGliSh

15