Philips GC3631 - Инструкция по эксплуатации - Страница 12

  1 

 Hold the iron in vertical position and press and release the steam 

boost button (Fig. 12).

Never direct the steam at people.

Drip stop

This iron is equipped with a drip-stop function: the iron automatically 

stops producing steam when the temperature is too low, to prevent 

water from dripping out of the soleplate. When this happens, you may 

hear a sound. 

automatic shut-off function (specific types only)

The automatic shut-off function automatically switches off the iron if it 

has not been moved for a while.

,

The red auto-off light flashes to indicate that the iron has been 

switched off by the automatic shut-off function (Fig. 13).

To let the iron heat up again:

  1 

 Pick up the iron or move it slightly

,

The red auto-off light goes out.

,

If the temperature of the soleplate has dropped below the set 

ironing temperature, the temperature light goes on.

  2 

 If the temperature light goes on after you have moved the iron, 

wait for it to go out before you start ironing.

Note: If the temperature light does not go on after you move the iron, the 

soleplate still has the right temperature and the iron is ready for use.

Cleaning and maintenance

Cleaning

  1 

 Set the steam control to position 0, remove the mains plug from 

the wall socket and let the iron cool down.

  2 

 Wipe flakes and any other deposits off the soleplate with a damp 

cloth and a non-abrasive (liquid) cleaning agent.

EnGliSh

12