Philips GC3360/02 - Инструкция по эксплуатации - Страница 11

Problem

Possible cause

Solution

The iron is not hot 

enough and/or the drip-

stop function has been 

activated (specific types 

only).

Set an ironing temperature that is suitable for 

steam ironing ( 

2

 to MAX). Put the iron on its 

heel and wait until the amber temperature light 

goes out before you star t ironing.

Water droplets 

drip onto the 

fabric during 

ironing.

The temperature dial has 

been set to a 

temperature that is too 

low for steam ironing.

Set an ironing temperature that is suitable for 

steam ironing (temperature settings 

2

 to 

MAX). Put the iron on its heel and wait until the 

amber temperature light goes out.

You have put an additive 

in the water tank.

Rinse the water tank and do not put any additive 

in the water tank.

You have not closed 

the cap of the filling 

opening properly.

Press the cap until you hear a click.

Flakes and 

impurities come 

out of the 

soleplate during 

ironing.

Hard water forms flakes 

inside the soleplate.

Use the Calc-Clean function one or more times 

(see chapter ‘Cleaning and maintenance’, section 

‘Calc-Clean function’).

The temperature 

light flashes red 

(specific types 

only).

The automatic shut-off 

function has switched off 

the iron (see chapter 

‘Features’).

Move the iron slightly to deactivate the 

automatic shut-off function. The red auto-off 

indication of the temperature light goes out.

Water drips from 

the soleplate after 

the iron has 

cooled down or 

has been stored 

(specific types 

only)

You have put the iron in 

horizontal position while 

there was still water in 

the water tank.

Always set the steam control to position 0 and 

empty the water tank after use. Store the iron 

on its heel.

The iron does 

not produce a 

steam boost.

You used the steam boost 

function too often within 

a shor t period.

Continue ironing in horizontal position and wait 

a while before you use the steam boost function 

again..

The iron is not hot 

enough.

Set an ironing temperature at which the steam 

boost function can be used (temperature 

settings 

2

 to MAX). Put the iron on its heel 

and wait until the amber temperature light goes 

out before you use the steam boost function. 

EnGlish

11