Philips GC2220 - Инструкция по эксплуатации - Страница 10

Vertical Shot of Steam
(GC2225/2220/2215/2130/2126/2125/2120/2115 only)

C

1

The Shot-of-Steam function can also be used when you are

holding the iron in vertical position. This is useful for removing
creases from hanging clothes, curtains, etc.

Never direct the steam towards people.

Drip stop (GC2225/2220/GC2130/2126/2125 only)

This iron is equipped with a drip stop function: the iron automatically
stops steaming when the temperature is too low to prevent water
from dripping out of the soleplate. When this happens you will hear a
click.

Automatic shut-off (specific types only)

An electronic safety device will automatically switch the heating
element off if the iron has not been moved for a while.

C

◗

To indicate that the heating element has been switched off, the
automatic shut-off light will start blinking.

To heat up the iron again: pick it up or move it slightly. The automatic
shut-off light will go out.

1

If the temperature light goes on, wait for it to go out before

you start ironing.

2

If the temperature light does not go on, the iron is ready for

use.

Cleaning and maintenance

Calc-Clean function

◗

The Calc-Clean function removes the scale particles.

Use the Calc-Clean function once ever y two weeks. If the water in
your area is ver y hard (i.e. when flakes come out of the soleplate
during ironing), the Calc-Clean function should be used more
frequently.

1

Set the steam control to position 

O

.

2

Fill the water tank to the maximum level.

E N G L I S H

1 0