Philips GC1930/02 - Инструкция по эксплуатации - Страница 16

Problem

Possible cause

Solution

The light on 

the handle 

flashes 

(specific types 

only).

The automatic 

shut-off function 

has been activated 

(see chapter 

‘Features’, section 

‘Automatic shut-

off ’).

Pick up the iron or move it 

slightly to deactivate the 

automatic shut-off function. The 

automatic shut-off light goes out.

Water 

droplets drip 

on the fabric 

during ironing.

You have not 

closed the cap of 

the filling opening 

properly.

Press the cap until you hear a 

click.

The set 

temperature is too 

low for steam 

ironing.

Set an ironing temperature that 

is suitable for steam ironing ( 

2

 to MAX). Put the iron on its 

heel and wait until the 

temperature light goes out 

before you star t ironing.

You have put an 

additive in the 

water tank.

Rinse the water tank and do not 

put any additive in the water 

tank.

Specific types only: 

you have used the 

steam boost 

function at a setting 

below 

3

.  

Set the temperature dial to a 

setting between  

3

 and 

MAX.

Specific types only: 

you have used the 

steam boost 

function too often 

within a shor t 

period.

Put the iron on its heel or 

continue ironing in horizontal 

position and wait a while before 

you use the steam boost 

function again.

EnGlish

16