Maxwell MW-3051BN - Инструкция по эксплуатации - Страница 8

8

ENGLISH

IRON MW-3051 BN

The iron is intended for ironing clothes, bedding 

and for vertical steaming of fabrics.

DESCRIPTION

1. 

Water spray

2. 

Water inlet lid

3. 

“Continuous steam supply/self-clean” 

switch

4. 

Burst of steam button

5. 

Water spray button

6. 

Handle

7. 

Heating element ON/OFF indicator

8. 

Power cord protection

9. 

Iron base

10. 

Water tank

11. 

Temperature control knob

12. 

Maximum water level mark

13. 

Iron soleplate

14. 

Beaker

ATTENTION!

For additional protection it is reasonable to 

install a residual current device (RCD) with 

nominal operation current not exceeding 

30 mA, to install RCD, contact a specialist.

SAFETY MEASURES 

Before using the electrical unit, read this instruc-

tion manual carefully and keep it for future refer-

ence.

Use the unit for its intended purpose only, as 

specified in this manual. Mishandling of the unit 

may lead to its breakage and cause harm to the 

user or damage to his/her property.

• 

Before switching the unit on, make sure that 

your home mains voltage corresponds to the 

unit operating voltage.

• 

The power cord is equipped with a Euro-

plug; insert it into a socket that has a reliable 

grounding connection.

• 

To avoid fire, do not use adapters for plug-

ging the unit in.

• 

To avoid mains overloading, provide that no 

other electrical appliances with higher power 

consumption are connected to the same 

outlet.

• 

Do not use the iron outdoors and in places 

with high humidity.

• 

Place the iron on a flat stable surface or use a 

stable ironing board.

• 

ATTENTION! 

The surfaces of the iron get hot 

during operation. Keep open skin areas away 

from iron hot surfaces or outgoing steam to 

avoid burns.

• 

Do not fill the water tank with scented liquids, 

vinegar, starch solution, descaling reagents, 

chemicals etc.

• 

Do not switch the unit on in places where 

aerosols are sprayed or highly flammable liq-

uids are used.

• 

To avoid damaging the soleplate be very 

careful when ironing clothes with metal zip-

pers or buttons.

• 

Make sure that the power cord is not on the 

ironing board and it doesn’t touch hot sur-

faces and sharp edges.

• 

Never leave the unit connected to the mains 

unattended. During breaks in operation and 

when the iron is cooling down, put the iron on 

the base (in a vertical position).

• 

Before plugging/unplugging the iron, set the 

temperature control knob to the minimum 

position and switch the continuous steam 

supply off.

• 

Always unplug the iron if you are not using it.

• 

Always take the power plug out of the mains 

socket before filling the water tank with water.

• 

The water inlet lid should be closed during 

ironing.

• 

To unplug the iron, always hold the power 

plug, never pull the power cord.

• 

To avoid electric shock, do not immerse the 

iron, the power cord and the plug into water 

or any other liquids.

• 

Before taking the iron away, let it cool down 

completely and pour out the remaining water.

• 

Pour out water from the water tank only after 

unplugging the iron.

• 

Clean the unit regularly.

• 

Do not touch the unit body and the power 

plug with wet hands.

• 

Do not allow children to touch the iron body 

and the power cord during operation.

• 

Do not leave children unattended to prevent 

using the unit as a toy.

• 

For children safety reasons do not leave 

polyethylene bags, used as packaging, unat-

tended.

Attention! 

Do not allow children to play with 

polyethylene bags or packaging film. 

Danger 

of suffocation!

IM MW-3051.indd   8

10/4/17   11:45