Maxwell MW-3051BN - Инструкция по эксплуатации - Страница 10

10

ENGLISH

IRONING TEMPERATURE

Before operation, test the heated iron on a piece 

of cloth to be sure that the iron soleplate (13) and 

the water tank (10) are clean.

• 

Always check the recommended ironing tem-

perature indicated on the tag before ironing.

• 

If the item label is marked with the symbol  

, do not iron the item.

• 

If there is no tag with recommended ironing 

temperature, but you know the type of fab-

ric, use the following table to determine the 

proper temperature.

Ironing temperature table

Icons

Fabric type (temperature)

do not iron

•

Synthetics, nylon, acryl, polyester 

(low temperature)

••

Silk/wool (medium temperature)

•••

Cotton (high temperature)

МАХ

Linen (high temperature)

• 

This table is only valid for smooth materials. 

Fabrics of other types (crimped, raised, etc.) 

are best ironed at low temperature.

• 

Sort items by ironing temperature first: syn-

thetics to synthetics, wool to wool, cotton to 

cotton etc.

• 

The iron heats up faster than it cools down. 

For this reason, it is recommended to iron the 

items which require low temperature first (for 

instance, synthetic fabrics). After that, start 

ironing at higher temperature (silk/wool). 

Cotton and linen items should be ironed last.

• 

If an item is made of mixed fabrics, the iron 

should be set to the lowest temperature (for 

instance, if an item is 60% polyester and 40% 

cotton, it should be ironed at temperature 

used for polyester ironing «

•

»).

• 

If you cannot define the fabric structure, find 

a spot that is inconspicuous when the item is 

being worn and select the ironing tempera-

ture experimentally (always start with the 

lowest temperature and raise it gradually until 

you get the desired result).

• 

Corduroy and other fabrics that become 

glossy quickly should be ironed strictly in 

one direction (in the direction of the pile) with 

slight pressure.

• 

To avoid appearance of glossy spots on 

synthetic and silk fabrics, iron them back-

side.

SETTING THE IRONING TEMPERATURE

• 

Place the iron on its base (9).

• 

Insert the power plug into the mains socket.

• 

Turn the control knob (11) to set the required 

ironing temperature: «

•

», «

••

», «

•••

» or 

«

MAX

», depending on the type of fabric, the 

indicator (7) will light up.

• 

Once the temperature of the soleplate (13) 

reaches the set point, the indicator (7) will go 

out and you can start ironing.

Note:

• 

If you are ironing at high temperature but you 

need to switch to lower temperature, wait 

until the soleplate temperature decreases 

and the indicator (7) lights up, and only then 

you may start ironing.

WATER SPRAY

• 

You can dampen the fabric by pressing the 

water spray button (5) several times.

• 

Make sure that there is enough water in the 

water tank (10).

DRY IRONING

• 

Place the iron on its base (9).

• 

Insert the power plug into the mains socket.

• 

Set the continuous steam supply knob (3) to 

the position   – the steam supply is off.

• 

Turn the control knob (11) to set the required 

ironing temperature: «

•

», «

••

», «

•••

» or 

«

MAX

», depending on the type of fabric, the 

indicator (7) will light up.

• 

Once the temperature of the soleplate (13) 

reaches the set point, the indicator (7) will go 

out and you can start ironing.

• 

After you finish ironing, set the temperature 

control knob (11) to the “OFF” position.

• 

Pull the power plug out of the mains socket 

and let the iron cool down completely.

STEAM IRONING

While steam ironing it is necessary to set the 

ironing temperature «

••

», «

•••

», «

МАХ

».

• 

Place the iron on its base (9).

• 

Set the continuous steam supply knob (3) to 

the position 

– the steam supply is off.

• 

Insert the power plug into the mains socket.

IM MW-3051.indd   10

10/4/17   11:45