Утюги Maxwell MW-3047 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
13
ENGLISH
Hold the iron vertically at the distance of 10-30 cm
from the clothes and press the burst of steam but-
ton (4) with 4–5 second intervals, steam will be
released from the soleplate (14) intensively.
Important information
Vertical steaming is not recommended for synthetic
fabrics.
•
To avoid fabric melting, do not touch it with the
iron’s soleplate while steaming.
•
Never steam clothes on a person as the steam
temperature is very high, use a clothes hanger
or a coat rack.
•
After you finish ironing, switch the iron off and
wait until it cools down completely, then open
the water inlet lid (2), turn over the iron and
drain any remaining water.
STEAM CHAMBER CLEANING
To prolong the lifetime of the iron, we recommend
cleaning the steam chamber regularly.
•
Set the continuous steam supply knob (3) to
the utmost left position – continuous steam
supply is off.
•
Fill the water tank (11) until it is filled half way.
•
Place the iron on its base (9).
•
Insert the power plug into the mains socket.
•
Set the control knob (10) to the maximum sole-
plate temperature
«MAX»
, the pilot lamp (7) will
light up.
•
When the iron soleplate (14) reaches the set
temperature, the pilot lamp (7) will go out and
you can start cleaning the steam chamber.
•
Switch the iron off by setting the temperature
control knob (10) to the
«MIN»
position.
•
Remove the power plug from the mains socket.
•
Hold the iron above the sink horizontally, press
and hold down the self-clean button (12).
•
Boiling water and steam with scale will be
released from the iron soleplate (14) openings.
•
Slightly sway the iron back and forth, until all the
water leaves the water tank (11).
•
Place the iron on its base (9) and let it cool
down completely.
•
When the soleplate (14) cools down completely,
wipe it with a dry cloth.
•
Before you take the iron away for storage, make
sure that there is no water in the water tank (11)
and that the iron soleplate (14) is completely dry.
CLEANING AND CARE
•
Before cleaning the iron, make sure that it is
unplugged and has cooled down completely.
•
Wipe the iron body with a slightly damp cloth
and then wipe it dry.
•
Scale on the iron soleplate can be removed with
a cloth soaked in vinegar-water solution.
•
After removing scale, polish the soleplate sur-
face with a dry cloth.
•
Do not use abrasives to clean the iron soleplate
and body.
•
Avoid contact of the iron soleplate with sharp
metal objects.
STORAGE
•
Set the temperature control knob (10) to the
«MIN»
position and the continuous steam sup-
ply knob (3) to the utmost left position (steam
supply is off).
•
Remove the power plug from the mains socket.
•
Open the water inlet lid (2), turn over the iron
and drain any remaining water from the water
tank (11).
•
Close the water inlet lid (2).
•
Put the iron vertically and let it cool down com-
pletely.
•
Store the iron vertically in a dry cool place out of
reach of children.
DELIVERY SET
Iron – 1 pc.
Beaker – 1pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50 Hz
Maximal power: 2400 W
The manufacturer preserves the right to change
the design and the specifications of the unit without
a preliminary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be
produced when making any claim under the terms
of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
MW-3047.indd 13
15.12.2015 12:57:25
