JVC KS-F525 - Инструкция по эксплуатации - Страница 11

11

ENGLISH

PTY Standby Reception

When you press PTY while listening
to an FM station, the PTY indicator is
lit during reception of a PTY station
and the PTY standby mode is
engaged. The selected PTY name
stored on page 12 flashes for 5
seconds.

• When the station being received is not a PTY station,

the PTY indicator flashes. Press 

¢

 or 

4

to engage the PTY standby mode. “SEARCH” appears
on the display, and PTY station search starts. When a
PTY station is tuned into, the PTY indicator is lit.

7

If you are listening to a tape or other connected
components and wish to listen to a selected PTY
broadcast, press PTY to enter the PTY standby
mode. (The PTY indicator lights up.)

If the selected PTY programme starts broadcasting
while the PTY standby mode is active, the selected
PTY name appears and the playback source
c h a n g e s   t o   t h e   F M   b a n d . T h e   s e l e c t e d   P T Y
programme can then be heard.

To deactivate the PTY standby mode, press PTY
again.

The same programme can be received on
different frequencies.

Using Standby Reception

S t a n d by   R e c e p t i o n   a l l ow s   t h e   u n i t   t o   sw i t c h
temporarily to your favor ite programme (PTY:
Programme Type) and Traffic Announcement (TA)
from the current source (another FM station, tape
or other connected components).

•

Standby Reception will not work if you are listening
to an AM station.

TA Standby Reception

When you press TP RDS while listening
to an FM station, the TP indicator is lit
d u r i n g   r e c e p t i o n   o f   a  T P   ( Tr a f f i c
Programme) station and the TA standby
mode is engaged.

•

When the station being received is not a TP station,
the TP indicator flashes. Press 

¢

 or 

4

to engage the TA standby mode. “SEARCH” appears
on the display, and TP station search starts. When a
TP station is tuned into, the TP indicator is lit.

7

If you are listening to a tape or other connected
components and wish to listen to a TP station,
press TP RDS to enter the TA standby mode. (The
TP indicator lights up.)

If a traffic programme starts broadcasting while the
TA standby mode is active, “TRAFFIC” appears and
the playback source changes to the FM band. The
volume increases to the preset TA volume level (see
page 14) and the traffic programme can be heard.

To deactivate the TA standby mode, press TP
RDS again.

Programme 1
broadcasting
on frequency C

Programme 1
broadcasting
on frequency B

Programme 1
broadcasting
on frequency E

Programme 1
broadcasting
on frequency A

PTY

Programme 1
broadcasting
on frequency D

TP 
RDS