Триммеры Stiga SGT 500 AE 278100008/ST1 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
EN - 17
PROBLEM
PROBABLE CAUSE
SOLUTION
4. The line is not released
when the automatic
release is turned on
The line is stuck to itself
Lubricate with silicone spray
Not enough line on the
reel or reel empty
Replace the reel (chap. 8.1.1)
or the line (chap. 8.1.2)
The line is worn and too short
Release the line manually (chap. 6.4.2.)
The line is tangled on the reel or broken Remove the line from the reel
and
rewind it (chapter 8.1.2)
5.
The cutting means
comes into contact
with a foreign body.
-
Turn off the machine, remove the battery and:
- inspect for damage;
- check for and tighten any loose parts;
- have all replacements or repairs carried
out by an authorised service centre.
6.
Excessive noise and/or
vibration is experienced
whilst working
Loose or damaged parts.
Turn off the machine, remove the battery and:
- inspect for damage;
- check for and tighten any loose parts;
- have all replacements or repairs carried
out by an authorised service centre.
7.
The machine gives off
smoke whilst working
Machine damaged
Do not use the machine. Immediately
turn off the machine remove the battery
and contact a service centre.
8.
Battery power
reserve is low
Severe working conditions
requiring greater
current absorption
Optimise operations
(par. 7.2.1)
Battery is insufficient for
operating requirements
Use a second battery or
extended
battery (par. 15.1)
Decrease in battery capacity
Purchase a new battery
PROBLEM
PROBABLE CAUSE
SOLUTION
9. The battery charger
is not recharging
the battery
Battery is not correctly inserted
in the battery charger
Check it is correctly inserted (par. 7.2.3)
Unsuitable environmental conditions
Recharge the battery in places with
suitable temperatures (see battery/
battery charger instruction manual)
Dirty contacts
Clean the contacts
The battery charger is not energised
Check it is plugged in and the
power socket is energised
Faulty battery charger
Replace with an original spare part
-
If the problem persists, refer to the
battery/battery charger manual
