SKIL F0150735RA - Инструкция по эксплуатации - Страница 8

8

-  clean ventilation slots J 

2

 regularly with a brush or 

compressed air

•  Regularly check the condition of the cutting head and the 

tightness of nuts, bolts and screws

•  Regularly check for worn or damaged components and 

have them repaired/replaced when necessary

•  Storage 

&

-  store the tool 

indoors

 in a dry and locked-up place, 

out of reach of children

-  securely mount storage rail K on the wall with 4 screws 

(

not supplied

) and horizontally leveled

•  If the tool should fail despite the care taken in 

manufacturing and testing procedures, repair should be 

carried out by an after-sales service centre for SKIL 

power tools
-  send the tool 

undismantled

 together with proof of 

purchase to your dealer or the nearest SKIL service 

station (addresses as well as the service diagram of 

the tool are listed on www.skil.com)

TROUBlESHOOTING

•  The following listing shows problem symptoms, possible 

causes and corrective actions (if these do not identify 

and correct the problem, contact your dealer or service 

station)

!  switch off the tool and disconnect the plug before 

investigating the problem

★

Tool does not operate

-  power supply socket faulty -> use another socket

-  extension cord damaged -> replace extension cord

★ Tool operates intermittently

-  internal wiring defective -> contact dealer/service 

station

-  on/of switch defective -> contact dealer/service 

station

★ Tool vibrates abnormally

-  grass too high -> cut in stages

★

Tool does not cut

-  line too short/broken of -> feed the line manually

★ Line cannot be fed

-  spool empty -> replace spool

-  line entangled inside spool -> inspect spool; rewind if 

necessary

★ Line is not cut of to correct length -> remove cover from 

cutting blade

★

Line keeps breaking

-  line entangled inside spool -> inspect spool; rewind if 

necessary

-  trimmer incorrectly used -> only trim with the tip of the 

line; avoid stones, walls and other hard objects; feed 

the line regularly

ENVIRONmENT

• 

Do not dispose of electric tools, accessories and 

packaging together with household waste material

(only for EU countries)

-  in observance of European Directive 2012/19/EC on 

waste of electric and electronic equipment and its 

implementation in accordance with national law, 

electric tools that have reached the end of their life 

must be collected separately and returned to an 

environmentally compatible recycling facility

-  symbol 

9

 will remind you of this when the need for 

disposing occurs

DEClARATION OF CONFORmITY 

•  We declare under our sole responsibility that the product 

described under “Technical data” is in conformity with the 

following standards or standardization documents: EN 

60335, EN 61000, EN 55014 in accordance with the 

provisions of the directives 2006/95/EC, 2004/108/EC, 

2006/42/EC, 2000/14/EC, 2011/65/EU

• 

Technical file at

: SKIL Europe BV (PT-SEU/ENG1), 

4825 BD Breda, NL

¹ÊÁÂÆιƼ½ÊÇǾ¼½Æ

ȽʹÌÁÇÆËŵÆ¿Áƽ½ÊÁÆ¿

ÍÊÇȽƓˁ˅ʿ˂ ʽ¼¹Ɠ

Ĺ¾ ÁÂÿʹ¹¾

ÈÈÊÇιĹƹ¿½Ê

19.12.2013 

10

NOISE/VIBRATION

•  Measured in accordance with EN 60335 the sound 

pressure level of this tool is 70 dB(A) and the sound 

power level 90 dB(A) (standard deviation: 3 dB), and the 

vibration <2.5m/s² (hand-arm method; uncertainty K = 

1.5 m/s²)

•  Measured in accordance with 2000/14/EC (EN/ISO 

3744) the guaranteed sound power level LWA is lower 

than 93 dB(A) (conformity assessment procedure 

according to Annex VI)

Notiied body : KEMA, Arnhem, NL

Notiied body identiication number : 0344

•  The vibration emission level has been measured in 

accordance with a standardised test given in EN 60335; it 

may be used to compare one tool with another and as a 

preliminary assessment of exposure to vibration when 

using the tool for the applications mentioned

-  using the tool for diferent applications, or with diferent 

or poorly maintained accessories, may signiicantly 

increase

 the exposure level

-  the times when the tool is switched of or when it is 

running but not actually doing the job, may signiicantly 

reduce

 the exposure level

!  protect yourself against the effects of vibration 

by maintaining the tool and its accessories, 

keeping your hands warm, and organizing your 

work patterns

Coupe-bordures 

0735

INTRODUCTION

•  Cet outil est destiné à couper les herbes et mauvaises 

herbes sous les buissons ainsi que sur les pentes et les 
bordures qui ne peuvent être atteintes avec une tondeuse

•  Cet outil n’est conçu pour un usage professionnel