Skil 0078AR - Инструкция по эксплуатации - Страница 7

7

Cordless grass trimmer 

0738

INTRODUCTION

• 

This tool is intended for the cutting of grass and weeds 

under bushes as well as on slopes and edges that can 

not be reached with a lawn mower

• 

This tool is not intended for professional use

• 

Check whether the packaging contains all parts as 

illustrated in drawing 

②

• 

When parts are missing or damaged, please contact 

your dealer

• 

Read this instruction manual carefully before use 

and save it for future reference 

③

• 

Pay special attention to the safety instructions 

and warnings; failure to follow these may result in 

serious injury

TECHNICAL SPECIFICATIONS 

①

TOOL ELEMENTS 

②

A  

Cutting guard

B  

Adjustable guide handle

C  

Locking sleeve

D  

Telescopic tube

E  

Charger

F  

Green charging light

G  

Battery

H  

On/off switch

J  

Flower guard

K  

Blade storage compartment

L  

Cutting blade

M  

Ventilation slots

N  

Storage rail (

screws not supplied

)

P  

Storage hook

SAFETY

GENERAL SAFETY INSTRUCTIONS

WARNING! Read all safety warnings and all 

instructions.

 Failure to follow the warnings and instructions 

may result in electric shock, fire and/or serious injury. 

Save 

all warnings and instructions for future reference.

 The 

term "power tool" in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless) 

power tool. 

1)  WORK AREA SAFETY

a) 

Keep work area clean and well lit.

 Cluttered or dark 

areas invite accidents.

b) 

Do not operate power tools in explosive 

atmospheres, such as in the presence of flammable 

liquids, gases or dust.

 Power tools create sparks 

which may ignite the dust or fumes.

c) 

Keep children and bystanders away while operating 

a power tool.

 Distractions can cause you to lose 

control.

2)  ELECTRICAL SAFETY

a) 

Power tool plugs must match the outlet. Never 

modify the plug in any way. Do not use any adapter 

plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk 

of electric shock.

b) 

Avoid body contact with earthed or grounded 

surfaces such as pipes, radiators, ranges and 

refrigerators. 

There is an increased risk of electric 

shock if your body is earthed or grounded.

c) 

Do not expose power tools to rain or wet 

conditions.

 Water entering a power tool will increase 

the risk of electric shock.

d) 

Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. 

Keep cord away from heat, oil, sharp edges or 

moving parts.

 Damaged or entangled cords increase 

the risk of electric shock.

e) 

When operating a power tool outdoors, use an 

extension cord suitable for outdoor use.

 Use of a 

cord suitable for outdoor use reduces the risk of electric 

shock.

f) 

If operating a power tool in a damp location is 

unavoidable, use an earth leakage circuit breaker.

Use of an earth leakage circuit breaker reduces the risk 

of electric shock.

3)  PERSONAL SAFETY

a) 

Stay alert, watch what you are doing and use 

common sense when operating a power tool. Do 

not use a power tool while you are tired or under 

the influence of drugs, alcohol or medication.

 A 

moment of inattention while operating power tools may 

result in serious personal injury.

b) 

Use personal protective equipment. Always wear 

eye protection.

 Protective equipment such as dust 

mask, non-skid safety shoes, hard hat, or hearing 

protection used for appropriate conditions will reduce 

personal injuries.

c) 

Prevent unintentional starting. Ensure the switch 

is in the off-position before connecting to power 

source and/or battery pack, picking up or carrying 

the tool.

 Carrying power tools with your finger on the 

switch or energising power tools that have the switch on 

invites accidents.

d) 

Remove any adjusting key or wrench before turning 

the power tool on.

 A wrench or a key left attached to 

a rotating part of the power tool may result in personal 

injury.

e) 

Do not overreach. Keep proper footing and balance 

at all times.

 This enables better control of the power 

tool in unexpected situations.

f) 

Dress properly. Do not wear loose clothing or 

jewelry. Keep your hair, clothing and gloves away 

from moving parts.

 Loose clothes, jewelry or long hair 

can be caught in moving parts.

g) 

If devices are provided for the connection of dust 

extraction and collection facilities, ensure these are 

connected and properly used.

 Use of dust collection 

can reduce dust-related hazards.

4)  POWER TOOL USE AND CARE

a) 

Do not force the power tool. Use the correct power 

tool for your application.

 The correct power tool will 

do the job better and safer at the rate for which it was 

designed.

º

N

P

5x max

ACCESSORIES

WWW.SKIL.COM