Ryobi RLT4125 - Инструкция по эксплуатации - Страница 4

2

| English

■

Before use and after any impact, check that there are 
no damaged parts. A defective switch or any part that 
is damaged or worn should be properly repaired or 
replaced by an authorised service centre.

■

Make sure the cutting attachment is properly installed 
and securely fastened.

■

Never operate the product unless all guards, deflectors, 
and handles are properly and securely attached.

■

Consider the environment in which you are working. 
Keep the working area free from wires, sticks, stones 
and debris, which if struck by the cutter, can become 
thrown objects.

LAWN TRIMMER/EDGE TRIMMER SAFETY 
WARNINGS

■

Use the product in daylight or with good artificial light.

■

Avoid using on wet grass.

■

Do not walk backwards when using the product.

■

Keep firm footing and balance. Do not overreach. 
Overreaching can result in loss of balance. Always be 
sure of your footing on slopes. Walk, never run.

■

Keep bystanders, children and pets 15 m away from 
the area of operation, stop the product if anyone enters 
the area.

■

Keep the cutting attachment below waist level.

■

Never operate the product with damaged guards or 
without guards in place.

■

Never fit a metal replacement line.

■

Keep hands and feet away from the cutting means at all 
times, especially when switching on the motor.

■

Beware, the cutting elements continue to rotate after 
the motor is switched off.

■

Beware of objects thrown by the cutting means. Clear 
debris like small stones, gravel, and other foreign 
objects from the work area before starting operation. 
Wires or string may become entangled with the cutting 
means.

■

Switch off and disconnect from the power supply before:

●

servicing

●

leaving the product unattended

●

cleaning your product or clearing a blockage

●

changing accessories

●

checking for any damage after hitting a foreign 
object

●

checking for any damage if the product starts to 
vibrate abnormally

●

performing maintenance

■

The small blade fitted to the lawn guard is designed to 
trim the new extended line to the correct length for safe 
and optimum performance. It is very sharp; do not touch 
it, particularly when cleaning the product.

■

Always ensure that ventilation openings are kept clear 
of debris.

■

Make sure the cutting head attachment is properly 
installed and securely fastened.

■

Make sure all guards, deflectors and handles are 
properly and securely attached.

■

Do not modify the product in any way. This may 
increase the risk of injury to yourself or others.

■

Use only the manufacturer’s replacement cutting line. 
Do not use any other cutting attachment.

■

Immediately switch off and disconnect from the mains 
in the event of accident or breakdown. Don’t operate 
the product again until it has been fully checked by an 
authorised service centre.

TRANSPORTATION AND STORAGE

■

Stop the product and allow it to cool down before 
storing or transporting. Always disconnect from the 
power supply and wind the cable to prevent damage.

■

Clean all foreign materials from the product. Store it in a 
cool, dry, and well-ventilated place that is inaccessible 
to children. Keep away from corrosive agents, such 
as garden chemicals and de-icing salts. Do not store 
outdoors.

■

For transportation in vehicles, secure the product 
against movement or falling to prevent injury to persons 
or damage to the product.

MAINTENANCE

 WARNING

Use only original manufacturer’s replacement parts, 
accessories and attachments. Failure to do so can 
cause possible injury, poor performance, and may void 
your warranty.

 WARNING

Servicing requires extreme care and knowledge 
and should be performed only by a quali

fi

 ed  service 

technician. For service, bring the product to your nearest 
authorised service center for repair. When servicing, use 
only identical replacement parts.

■

Switch off and disconnect from the mains before 
conducting any maintenance or cleaning work.

■

You may make adjustments and repairs described in 
this manual. For other repairs, contact the authorised 
service agent.

■

For the replacement line, use only nylon filament line 
of the diameter described in the specification table of 
this manual.

■

After extending the new cutter line, always return the 
product to its normal operating position before starting.

■

After each use, clean the product with a soft dry cloth. 
Any part that is damaged should be properly repaired or 
replaced by an authorised service centre.

■

Check all nuts, bolts, and screws at frequent intervals 
for proper tightness to ensure the product is in a safe 
working condition.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still 
impossible to completely eliminate certain residual risk