Ryobi RLT4125 - Инструкция по эксплуатации - Страница 3

1

 English 

|

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

TR

Safety, performance, and dependability have been given 
top priority in the design of your electric lawn trimmer/edge 
trimmer. 

INTENDED USE

The electric lawn trimmer/edge trimmer is only intended for 
use outdoors by a standing operator.

The product is designed for cutting grass, light weeds, 
and other similar vegetation at or about ground level. 
The cutting plane should be approximately parallel to the 
ground surface when trimming and approximately vertical 
when edging.

The product should not be used to cut or trim hedges, 
bushes, or other vegetation where the cutting plane is not 
at or about ground surface level.

Do not use the product for any other purpose.

GENERAL SAFETY WARNINGS

 WARNING

When using the product, the safety rules must be 
followed. For your own safety and that of bystanders, 
please read these instructions before operating the 
product. Please keep the instruction safe for later use.

 WARNING

The product is not intended to be used by children or 
persons with reduced physical, mental or sensory 
capabilities. Children should be adequately supervised 
to ensure they do not play with the product.

 WARNING

Some regions have regulations that restrict the use of 
the product. Check with your local authority for advice.

TRAINING

■

Never allow children or people unfamiliar with these 
instructions to use the product. Local regulations may 
restrict the age of the operator.

■

Read the instructions carefully. Be familiar with all 
controls and the proper use of the product.

■

Keep bystanders, children, and pets 15 m away from 
the area of operation. Stop the product if anyone enters 
the area.

■

Never use the product when you are tired, ill or under 
the influence of alcohol, drugs or medicine.

■

Keep in mind that the operator or user is responsible 
for accidents or hazards occurring to other people or 
their property.

ELECTRICAL SAFETY

■

Power plugs must match the outlet. Never modify the 
plug in any way. Do not use any adapter plugs with 
earthed (grounded) power tools. Unmodified plugs and 
matching outlets will reduce risk of electric shock.

■

Avoid unintentional starting. Always check that the 

switch is in off position before plugging in the product 
to the power supply. Do not carry a plugged in product 
with your finger on the switch.

■

Avoid body contact with earthed or grounded surfaces, 
such as pipes, radiators, ranges and refrigerators. 
There is an increased risk of electric shock if your body 
is earthed or grounded.

■

Do not operate the product when there is a risk of 
lightning.

■

Do not expose the product to rain or wet conditions. 
Water entering an appliance will increase the risk of 
electric shock.

■

Electrical power should be supplied via a residual 
current device (RCD) with a tripping current of not more 
than 30 mA.

■

Before every use, examine the power cord for damage. 
If there are signs of damage, it must be replaced. 
Always uncoil the power cord during use; coiled cables 
can overheat.

■

If you need to use an extension cable, ensure it is 
suitable for outdoor use and has a current capacity 
sufficient to supply the product. The extension cord 
cable should be marked with either “H05RN-F” or H05 
VV-F”. Check it before every use for damage. Always 
uncoil it during use because coiled cables can overheat. 
Damaged extension cables should not be repaired; 
they should be replaced with an equivalent type.

■

Do not use the product if the electric cables are 
damaged or worn.

■

If the power cord or extension cable becomes 
damaged during use, disconnect from the power supply 
immediately. Do not touch the electric cables until the 
power supply has been disconnected.

■

Make sure the power cord is positioned so that it 
cannot be damaged by the cutting means and will not 
be stepped on, tripped over or otherwise subjected to 
damage or stress.

■

Never pick up or carry the product by the electric cable.

■

Keep the power cord away from heat, oil, and sharp 
edges.

■

Make sure voltage is correct for your product. A 
nameplate on the product indicates the product’s 
voltage. Never connect the product to an AC voltage 
that differs from this voltage.

■

Make sure the switch is in off position before 
disconnecting from power supply.

PREPARATION

■

Wear full eye and hearing protection while operating the 
product. If working in an area where there is a risk of 
falling objects, head protection must be worn.

■

Hearing protection may restrict the operators ability 
to hear warning sounds. Pay particular attention to 
potential hazards around and inside the working area.

■

Wear long trousers, boots, and gloves. Do not wear 
loose fitting clothing, short trousers, jewellery of any 
kind, or use with bare feet.

■

Secure long hair so it is above shoulder level to prevent 
entanglement in moving parts.