Makita UR100DWAEX - Инструкция по эксплуатации - Страница 11

11 ENGLISH

17. 

Don't force the tool. It will do the job better and 

with less likelihood of a risk of injury at the 

rate for which it was designed.

18. 

Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable 

liquids, gases or dust.

 Power tools create sparks 

which may ignite the dust or fumes.

19. 

Take a rest to prevent loss of control caused 

by fatigue.

 We recommend to take a 10 to 

20-minute rest every hour.

20. 

Do not use the tool on steep slopes.

21. 

The shoulder harness must be used during 

operation, if supplied with the tool.

Maintenance instructions

1. 

The condition of the cutting tool, protec-

tive devices and shoulder harness must be 

checked before commencing work.

2. 

Turn off the motor and remove the battery 

cartridge before carrying out maintenance, 

replacing the cutting tool and cleaning the 

tool.

3. 

After use, disconnect the battery cartridge 

from the tool and check for damage.

4. 

Check for loose fasteners and damaged parts 

such as nearly halfway cut-off state in the 

cutting tool.

5. 

When not in use store the equipment in a dry 

location that is locked up or out of children's 

reach.

6. 

Use only the manufacturer's recommended 

replacement parts and accessories.

7. 

Always ensure that ventilation openings are 

kept clear of debris.

8. 

Inspect and maintain the tool regularly, espe-

cially before/after use. Have the tool repaired 

only by our authorized service center.

9. 

Keep handles dry, clean and free from oil and 

grease.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity 

with product (gained from repeated use) replace 

strict adherence to safety rules for the subject 

product. MISUSE or failure to follow the safety 

rules stated in this instruction manual may cause 

serious personal injury.

Important safety instructions for 

battery cartridge

1. 

Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery 

charger, (2) battery, and (3) product using 

battery.

2. 

Do not disassemble battery cartridge.

3. 

If operating time has become excessively 

shorter, stop operating immediately. It may 

result in a risk of overheating, possible burns 

and even an explosion.

4. 

If electrolyte gets into your eyes, rinse them 

out with clear water and seek medical atten-

tion right away. It may result in loss of your 

eyesight.

5. 

Do not short the battery cartridge:

(1) 

Do not touch the terminals with any con-

ductive material.

(2) 

Avoid storing battery cartridge in a con-

tainer with other metal objects such as 

nails, coins, etc.

(3) 

Do not expose battery cartridge to water 

or rain.

A battery short can cause a large current 

flow, overheating, possible burns and even a 

breakdown.

6. 

Do not store the tool and battery cartridge in 

locations where the temperature may reach or 

exceed 50 °C (122 °F).

7. 

Do not incinerate the battery cartridge even if 

it is severely damaged or is completely worn 

out. The battery cartridge can explode in a fire.

8. 

Be careful not to drop or strike battery.

9. 

Do not use a damaged battery.

10. 

The contained lithium-ion batteries are subject 

to the Dangerous Goods Legislation require-

ments. 

For commercial transports e.g. by third parties, 

forwarding agents, special requirement on pack-

aging and labeling must be observed. 

For preparation of the item being shipped, consult-

ing an expert for hazardous material is required. 

Please also observe possibly more detailed 

national regulations. 

Tape or mask off open contacts and pack up the 

battery in such a manner that it cannot move 

around in the packaging.

11. 

Follow your local regulations relating to dis-

posal of battery.

12. 

Use the batteries only with the products 

specified by Makita.

 Installing the batteries to 

non-compliant products may result in a fire, exces

-

sive heat, explosion, or leak of electrolyte.

SAVE THESE INSTRUCTIONS.

CAUTION:

Only use genuine Makita batteries.

Use of non-genuine Makita batteries, or batteries that 

have been altered, may result in the battery bursting 

causing fires, personal injury and damage. It will 

also void the Makita warranty for the Makita tool and 

charger.

Tips for maintaining maximum 

battery life

1. 

Charge the battery cartridge before completely 

discharged. Always stop tool operation and 

charge the battery cartridge when you notice 

less tool power.

2. 

Never recharge a fully charged battery car-

tridge. Overcharging shortens the battery 

service life.

3. 

Charge the battery cartridge with room tem-

perature at 10 °C - 40 °C (50 °F - 104 °F). Let 

a hot battery cartridge cool down before 

charging it.