Makita LXT DUR189Z - Инструкция по эксплуатации - Страница 8

8 ENGLISH

WARNING:

 The vibration emission during actual use of the power tool can differ from the declared emission 

value depending on the ways in which the tool is used.

WARNING:

 Be sure to identify safety measures to protect the operator that are based on an estimation of 

exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when 

the tool is switched off and when it is running idle in addition to the trigger time).

Symbols

The following show the symbols used for the equip-

ment. Be sure that you understand their meaning before 

use.

Take particular care and attention.

Read instruction manual.

Danger; be aware of thrown objects.

The distance between the tool and 

bystanders must be at least 15 m.

360°

Keep bystanders away.

15m(50

FT

)

Keep distance at least 15 m.

Wear a helmet, goggles and ear protection.

Wear protective gloves.

Wear sturdy boots with nonslip soles. 

Steeltoed safety boots are recommended.

Do not expose to moisture.

Never use metal blade.

Ni-MH

Li-ion

Only for EU countries  

Do not dispose of electric equipment or 

battery pack together with household 

waste material! In observance of the 

European Directives, on Waste Electric 

and Electronic Equipment and Batteries 

and Accumulators and Waste Batteries and 

Accumulators and their implementation 

in accordance with national laws, electric 

equipment and batteries and battery 

pack(s) that have reached the end of 

their life must be collected separately and 

returned to an environmentally compatible 

recycling facility.

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A 

to this instruction manual.

SAFETY WARNINGS

IMPORTANT SAFETY 

INSTRUCTIONS

WARNING:

Read all safety warnings and 

all instructions. 

Failure to follow the warnings and 

instructions may result in electric shock, fire and/or 

serious injury.

Save all warnings and instruc-

tions for future reference.

1. 

Be familiar with the controls and proper use of 

the equipment.

2. 

Cutting elements continue to rotate after the 

motor is switched off.

3. 

Never allow children or people unfamiliar with 

the instructions to use the machine. Local reg-

ulations may restrict the age of the operator.

4. 

Stop using the machine while people, espe-

cially children, or pets are nearby.

5. 

Only use the machine in daylight or good 

artificial light. Avoid using the machine in bad 

weather conditions especially when there is a 

risk of lightning.

6. 

Before using the machine and after any 

impact, check for signs of wear or damage and 

repair as necessary.

7. 

Take care against injury from any device 

fitted for trimming the filament line length. 

After extending new cutter line always return 

the machine to its normal operating position 

before switching on.

8. 

Never fit metal cutting elements.

9. 

This appliance is not intended for use by 

persons (including children) with reduced 

physical, sensory or mental capabilities, or 

lack of experience and knowledge, unless they 

have been given supervision or instruction 

concerning use of the appliance by a person 

responsible for their safety. Children should be 

supervised to ensure that they do not play with 

the appliance.

10. 

Use the tool with the utmost care and attention.

11. 

Operate the tool only if you are in good phys-

ical condition. Perform all work calmly and 

carefully. Use common sense and keep in mind 

that the operator or user is responsible for 

accidents or hazards occurring to other people 

or their property.

12. 

Never operate the tool when tired, feeling ill or 

under the influence of alcohol or drugs.

13. 

The tool should be switched off immediately if 

it shows any signs of unusual operation.