AL-KO GTE 450 Comfort 112929 - Инструкция по эксплуатации - Страница 17

Startup

440 083_a

17

4. Hold  the  appliance  with  both  hands.  Do  not

place the cutter head on the ground when do-

ing this.

5. Hold the auxiliary handle in one hand and the

upper grip with your other hand.

6. Press the switch in the upper grip and hold it

pressed. The appliance runs.

7. Let the lawn trimmer run at idling speed for a

few moments. This causes the cutting line to

be cut off to the correct length.

8. The appliance switches off when the switch is

released.

ADVICE

After  the  appliance  has  been  switched

off, the spool head continues to rotate for

a few seconds.

OPERATION

Switch on the appliance before approaching

the grass to be cut.
Angle  the  appliance  forwards  slightly,  and

walk forwards slowly (9).
Sweep  the  appliance  to  the  right  and  left  in

order to cut the grass (9).

Long grass must be cut in several passes. Always

proceed from top (10-1, 10-2) to bottom.

ADVICE

Tap the spool head on the ground from

time to time when working. The automa-

tic  tip  function  always  keeps  the  line  at

optimum length.

Use the plant protection car in order to hold

the  appliance  at  the  correct  distance  from

obstacles (11-1).
Make  sure  the  motor  is  stopped  before  you

remove any cuttings.

CAUTION!

The  vibration  value  during  use  of  the

electrical implement may differ from the

indicated  value,  depending  on  what  the

appliance is used for.

Do not overload the appliance during work.

MAINTENANCE AND CARE

CAUTION!
Danger from electrical current!

Before  all  maintenance  and  care  jobs,

disconnect the appliance from the mains

and  secure  it  to  prevent  it  from  being

switched back on.

After  use,  disconnect  the  mains  plug  and

check the machine for damage.
Keep  the  appliance  out  of  reach  of  children

and unauthorised persons.
Electrical malfunctions are only allowed to be

rectified by authorised specialist workshops.
Never  use  the  appliance  if  the  blade  of  the

line cutter is missing or damaged.
Always keep the guard, string head and en-

gine free of mowing debris.
Do not spray the machine with water! Pene-

trating  water  (ignition  system,  carburettor...)

can lead to malfunctions.
Do not get the appliance wet or expose it to

moisture.
Regularly  check  the  appliance  is  in  good

working order.
Do not use any cleaning agents or solvents.

They  can  cause  irreparable  damage  to  the

appliance.

Changing the spool

(Replacement spool GTE art. no. 112966)
1. Press the two locking catches to open the co-

ver (8-1).

2. Remove the empty spool (8-2).
3. Insert the new spool.
4. Make sure that the spring is re-inserted (8-3).
5. Guide the line outwards on both sides.
6. Put on the cover and engage the locking cat-

ches.

STORAGE

Clean the appliance and its accessories after

each use.

ADVICE

Hang up the lawn trimmer by its handle.

This avoids placing unnecessary load on

the cutter head.

Store the appliance in a dry place protected

against frost.

DISPOSAL

Do not dispose of old

equipment,batteries or accumulators

as householdwaste!

Product, packaging, and accessories

were made with recyclable materials, and

should be disposed of accordingly.