Omron M2 Eco (HEM-7051-RU) - Инструкция по эксплуатации - Страница 30

30

5.Handling Errors and Problems

5.2

Troubleshooting

Problem

Cause

Remedy

The reading is 

extremely low (or high).

Arm cuff not applied 

correctly.

Apply the arm cuff 

correctly. 
Refer to section 3.2.

Movement or talking 

during measurement.

Remain still and do not 

talk during 

measurement.
Refer to section 3.3.

Clothing is interfering 

with the arm cuff.

Remove any clothing 

interfering with the arm 

cuff.
Refer to section 3.1.

Arm cuff pressure does 

not rise.

Is the air jack securely 

inserted into the main 

unit?

Make sure that the air 

jack is connected 

securely. 
Refer to section 3.2.

Air is leaking from the 

arm cuff.

Replace the arm cuff 

with a new one. 
Refer to Chapter 7.

Arm cuff deflates too 

soon.

The arm cuff is loose.

Apply the cuff correctly 

so that it is firmly 

wrapped around the 

arm. 
Refer to section 3.2.

Cannot measure or 

readings are too low or 

too high.

Has the arm cuff been 

inflated sufficiently?

Inflate the cuff so that it 

is 30 to 40 mmHg above 

your previous 

measurement result.
Refer to section 3.4.

The unit loses power 

during measurement.

The batteries are empty.

Replace the batteries 

with new ones.

Nothing happens when 

you press the buttons.

The batteries are empty.

Replace the batteries 

with new ones.

The batteries have been 

inserted incorrectly.

Insert the batteries with 

the correct (+/ -) polarity.

HEM-7051_EN-RU.book  Page 30  Thursday, January 8, 2009  9:09 AM