Omron M2 Eco (HEM-7051-RU) - Инструкция по эксплуатации - Страница 28

28

5.Handling Errors and Problems

5. Handling Errors and Problems

5.1

Error Messages

Error Display

Cause

Remedy

Cuff is under inflated.

Carefully read and repeat the steps 

listed under section 3.4.

Movement during 

measurement

Repeat measurement. Remain still 

and do not talk during 

measurement.
Refer to section 3.3.

Air plug disconnected.

Insert the air plug securely.
Refer to section 3.2.

Arm cuff not applied 

correctly.

Apply the arm cuff correctly. 
Refer to section 3.2.

Clothing is interfering with 

the arm cuff.

Remove any clothing interfering 

with the arm cuff.
Refer to section 3.2.

Air is leaking from the arm 

cuff.

Replace cuff with new one.
Refer to Chapter 7.

The arm cuff was inflated 

above 299 mmHg when 

inflating the cuff manually. 

Release your finger from the O/I 

START button before the pressure 

reaches 299 mmHg, when inflating 

the cuff manually.
Refer to section 3.4.

Battery power is low.

Replace all four “AA” batteries with 

new ones.
Refer to section 2.1.

Blinks or appears 

continuously

HEM-7051_EN-RU.book  Page 28  Thursday, January 8, 2009  9:09 AM