Microlife BP 2BHO - Инструкция по эксплуатации - Страница 8

4. Putting the blood-pressure monitor into operation

4.1. Inserting the batteries

After you have unpacked your device, first insert the 
batteries. The battery compartment is located on the 
underside of the device (see illustration).

a) Remove cover as illustrated
b) Insert the batteries (4 x size AA 1,5 V), thereby 

observing the indicated polarity. 

c) If the battery warning appears in the display, the

batteries are empty and must be replaced by new 
ones.

Attention!

• After the battery warning appears, the device is blocked until the batteries have been replaced.
• Please use «AA» Long-Life or Alkaline 1.5V Batteries. The use of 1.2V Accumulators is not recommended.
• If the blood-pressure monitor is left unused for long periods, please remove the batteries from the device.

Functional check: 

Hold on the O/I button down to test all the display 
elements. When functioning correctly all segments must 
appear. 

4.2. Using a mains adapter (special accessory)

It is possible to operate this blood-pressure instrument through a mains adapter (output 6V DC / 600 mA
with DIN plug). Make certain that you use a mains adapter which fulfils the legal requirements (CE sign
on the type plate).

a) Plug the DIN plug into the socket at the back of

the instrument.

b) Plug the mains adapter into a 230 V power socket.
c) Test that power is available by pressing the

O/I button.

Note:

• No power is taken from the batteries while the mains adapter is connected to the instrument.
• If the mains voltage is interrupted during the measurement (e.g. by removal of the mains adapter

from the mains socket), the instrument must be reset by removing the DIN plug from its socket.

• Please consult a specialist dealer if you have questions relating to the mains adapter.

4.3. Tube connection

Insert the cuff tube into the opening provided on the left
side of the instrument, as shown in the diagram. 

5