Caso HW 600 - Инструкция по эксплуатации - Страница 36

36 

15 Cleaning and Maintenance 

This chapter provides you with important notices with regard to cleaning and maintaining the 
device. Please observe the notices to prevent damages due to cleaning the device incorrectly 
and to ensure trouble-free operation.  

15.1  Safety information 

  Attention 

Please observe the safety instructions, before cleaning your device 
► Unplug the device when not in use and before any cleaning. 
► Never immerse the device, cord or plug in water or other liquids and do not place in the 

dishwasher. 

► Do not use iron brush, abradant, kitchen 

cleaner, or sharp cleaning tool for cleaning. 

15.2  Cleaning and descaling 

Wipe the device with damp cloth. 

Drainage stopper 

The drainage stopper prevents water from flowing 
out of the device. 
You can unscrew the stopper (3) with a screwdriver so that the dirty water can drain off. Then 
put the stopper back into the opening. Tighten it again so that it seals the drain. 

Please note 

► If you need to send the device to customer service, then first remove the water from the 

device. 

15.2.1 

Cleaning and descaling function 

When “Descale” is blinking in the display then the device needs to be descaled, please 
proceed as follows: 
Place device without drip tray and without water filter. Fill the watertank up to max marking. 
Add a little bit of vinegar. 
Place vessel below the spout which can collect whole content of watertank. 

Press 

Clean-button.

 The display shows „50“ as temperature. With 

Temp-button 

you 

can select between 50, 80 und 100°C. We recommend 80°C. Start the process with 

Start/Stop

. The device dispenses whole content of watertank and will be cleaned and 

descaled. Pour the water away. Rinse the watertank with fresh water after this. 

15.3  Storage 

If the device is not used frequently, unplug and clean it, then put back into the original 
packing box to avoid that the electrical components from getting humidified or damaged.