Brayer BR1092 (MULTI) - Инструкция по эксплуатации - Страница 6

6

EN

it does not touch hot surfaces or sharp edges of 

furniture.

•  Do not touch the power cord and the power plug with 

wet hands.Do not switch the thermopot on without 

water, after the thermopot is filled, close the lid tightly.

•  Ensure that the water level is not above the maximal 

mark «FULL». If the water level exceeds the maximal 

mark, boiling water can splash out of the thermopot 

during boiling.

•  To avoid burns by hot steam, do not bend over the 

steam release openings in the thermopot lid. Do not 

block the steam release openings with any objects.

•  Do not open the thermopot lid while water boiling.

• 

Be careful while carrying the thermopot filled with 

boiling water. 

•  Be very careful when pouring hot water out of the 

thermopot.

•  Unplug the thermopot before cleaning or when you 

are not using it. When unplugging the thermopot hold 

only the power cord plug and carefully remove it from 

the mains socket, do not pull the power cord — this 

can lead to damage of the power cord or the socket 

or cause short circuit.

•  To avoid electric shock do not immerse the thermopot 

into water or any other liquids.

•  Do not wash the thermopot in a dishwashing 

machine.

•  For children safety reasons do not leave polyethylene 

bags, used as a packaging, unattended.

ATTENTION! 

Do not allow children to play with polyethylene bags 

or packaging film. 

Danger of suffocation!

•  The thermopot is not intended for usage by children.

•  Do not leave children unattended to prevent using 

the unit as a toy.

•  Do not allow children to touch the unit and the power 

cord during the thermopot operation.

•  Place the unit out of reach of children during the 

operation and cooling down.

•  This unit is not intended for usage by physically or 

mentally disabled persons (including children) or by 

persons lacking experience or knowledge if they are 

not under supervision of a person who is responsible 

for their safety or if they are not instructed by this 

person on the usage of the unit.

•  Check the integrity of the power cord, the power plug 

and the thermopot body periodically.

•  If the power cord is damaged, it should be replaced 

by the manufacturer, a maintenance service or 

similar qualified personnel to avoid danger.

•  If the power cord is damaged, it should be replaced 

with a power cord received from the manufacture or 

service.

•  Transport the thermopot in the original package.

•  Keep the unit out of reach of children and disabled 

persons.