Телевизоры Elenberg CTV-2065 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
34
Notes
1) If you use the TV for the first time, you must use “auto search”
to tune TV channels in order to memorize all channels.
2) If your TV are not in TV input state, you must switch it to TV
state (operation details please refer to “Setting input mode”).
3) When you use the TV for the first time, you must set sound
system properly to your country (details please refer to “Setting
sound system”).
4) When you use the TV for the first time, you must set the video
format properly to your country (details please refer to “Setting
Video format” ).
6) SKIP
Select your expected skip channel by using number buttons, press
MENU button on the remote control or TV front panel, then press
VOL◀/▶ button to select “Settings” menu and press PROG▼/▲
button to select “TV Tuner”, then press VOL◀/▶ button to enter
“channel” menu and use PROG▼/▲ button to select “Channel skip”,
press VOL◀/▶ button to set “skip” on. If you want to renew your
skip channels, you can operate as steps above, but set “skip” off.
How to select TV channel
1) Select what you want to watch
Press PROG▼/▲ button to select what you want to watch In turn,
or use number keys directly to select what you want to watch.
Press number “0” to “9” to select channel number you wish, if the
channel you wanted is more than ten, you can press “-/--” button
to select it, and then press digital numbers to select channel you
wanted.
2) Press VOL◀/▶ button to adjust the right volume you would like to
enjoy.
3) Press MUTE button to turn off volume completely. To restore the
volume, press MUTE again.
4) Press RECALL button, the TV will show current channel on the up-
right screen.
5) Setting sound user mode
Press SND. MODE button on the remote control, the sound mode
will switch as following order:
Music→Standard→News→Memory→Music.
6) Setting picture mode
Press PIC. MODE button on the remote control. The picture mode
will switch as following order:
Dynamic→Standard→Soft→Memory→Dynamic
