Elenberg CTV-1540 - Инструкция по эксплуатации - Страница 43

Basic Operation

43

The user can obtain a satisfactory image through tuning brightness, contrast, and color tempera-
ture and etc., with four modes available for color temperature adjusting: 9300K, 7300K, 6500K and
user mode. In case of the user mode for color temperature adjusting, the screen will display a menu
as follows:

The user can adjust the red, green and blue separately by remote control to obtain a satisfactory
effect.

4. Setting PC monitor
When the TV set is connected to PC, it must adjust various parameters of the TV set such as phase
and amplitude for initial use due to the difference of PC graphics controller. Otherwise, some bad
phenomenon such as transverse line interference and decentralized image position may occur,
with detailed adjusting procedures as follows:

1) When the TV set remains in VGA input mode, press the menu key, and then press the PROG

/

key to select the «LOCATION» menu with the menu as follows:

2) Press the VOL

key to enter the «LOCATION» menu, and press the PROG

/

key to adjust the

parameter, and press the VOL

/

key to readjust the setup of parameter to obtain a satisfactory

effect.

3) In case of any unexpected problem during the parameter adjusting, it can reset to return the TV
set to the default setup in the factory.