Elenberg CTV-1540 - Инструкция по эксплуатации - Страница 33

Basic Operation

33

Turn on/off the Power

How to turn on/off the power

1. Insert the 12V DC power plug of the appliance into the 12V power socket of TV.
2. If the TV screen fails to shine, please press the standby key of the remote control or TV key-press.
3. For a temporary off status, press the standby key on the remote control or TV.
4. To turn off the power supply of the TV, it should pull out the plug of power supply.

Auto Off Function of Screen Display

1. Under TV status, the TV will enter a standby status automatically when Blue Screen switch ON
after about five minutes without TV signal input.
2. Under VGA status, the TV will enter a standby status automatically after about 45 seconds with-
out signal input.

Before-shutdown Memory

The image and sound status setup as well as the preset channel before shutdown will stay in mem-
ory. The appliance will start to work according to the status preset before the shutdown for turn-
ing-on next time.

Preset up TV channel

Press the menu key of TV or remote control, and then press the PROGA/V key to display a menu on
the TV screen as follows: