TELEFUNKEN TF-LED24S80T2 - Инструкция по эксплуатации - Страница 8

Телевизоры TELEFUNKEN TF-LED24S80T2 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 40
Загружаем инструкцию
background image

Operation

8

8

Operation

General operations

• Use two AAA batteries for the RC. The RC

should be pointed at remote sensor within 8 
meters and within 30 degrees at the left or the 
right side.

• Take the battery out of the RC if it is not

used for a long time.

• Do not mix new and used batteries or

different types of batteries. Weak batteries can 
leak and severely damage the RC.

• Do not expose the RC to shock, liquids,

and do not place it in an area with high 
humidity.

CAUTION!
Incorrect installation of the batteries may 

lead to an explosion.

Please replace used batteries with the 

batteries of the same or comparable type.

Signal sources

Press SOURCE, then press DOWN/UP cursor 
buttons on the RC or CH+/CH- buttons on the 
panel to select a source from the list. Press OK 
button on the RC or MENU button on the panel 
to confirm. Press EXIT to exit.

Power

• Connect the plug of the power cord to the

mains socket and press the POWER
button to switch on the TV.

• Do not leave your TV in standby mode for

a long period of time; if you are not going to 
use the unit, disconnect it from power supply.

• In TV mode the unit will automatically go to

standby mode if no signal for 5 minutes. 

Operations

• Press VOL- button repeatedly to decrease

the volume; press VOL+ button repeatedly to 
increase the volume.

• Press MUTE to mute sound, press this

button again or increase volume to resume 
sound.

• Press

 button on the RC to select 

from the present channel and the previously 

8

displayed channel.

Teletext operations 

(option)

Select a TV channel in order to pick up the 

picture signal of Teletext. Teletext button 
functions are as follows:

TTX:  Press  this  button  to  enter  into  TEXT 

mode.  Press  the  button  again  to  return  to  the 
channel you are watching.

HOLD: Press this button to stop the move 

to the next page. Press this button again to 
cancel operation.

INDEX: Press this button to go to the index 

page.
    REVEAL: Press this button to reveal the 
concealed information. Press this button again

co
to conceal the information.

Red/Green/Yellow/Blue buttons: Press 

these 4 color buttons to access directly to 
corresponding color page displayed at the 
lower parts of teletext screen.

.

Содержание

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

  1. Борис

    Дети играли с пультом и возможно заблокировали цифровые кнопки выбора каналов (1-9). При нажатии высвечивается соответствующий канал, но переключение не происходит. Теперь переключение каналов возможно только клавишей + -. Подскажите пожалуйста, как разблокировать кнопки?

    Ответить
Часто задаваемые вопросы
Как посмотреть инструкцию к TELEFUNKEN TF-LED24S80T2?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"