Telefunken TF-LED24S12T2 - Инструкция по эксплуатации - Страница 4

Before you start

4

4

Before you start

the burning-light, direct sunlight, vibration, 

high-temperature and humidity.

• Do not place any vase, potted plant, cup,

medicine and any container with water on this 
product. If the liquid is spilt, it may cause the 
fire, electric shock or breakdown.

• Do not install it at the place on the strong

magnetic field or current field. It may cause 
break down. This equipment may be observed 
deterioration of the picture by electromagnetic 
radiation in electromagnetic environment.

• Fasten the wheel of the product or shelf

with wheels when installing this product. If it 
moves or is tipped over, it may be damaged.

• Do not place any fire source such as

candlelight close to this product or place it on 
this product. If it is tipped over or fallen down, it 
may cause damage or fire.

• Do not place the unit into closed space

of TV for better ventilation; it can reduce the 
product lifetime. Keep a space at least 10 cm 
at above, left and right of the TV.

• Please place all the signal cords behind of

rear panel.

• Do not overexert or touch the panel when

you convey the product. Do not transfer the 
LED TV up or down display direction.

•

Do not transport it with any cables

connected. If you move this product with  

cables connected, the damaged cables or 

connection terminals may cause fire, electric 

shock or breakdown.

• 2 persons or more shall transport the

device, which is heavier than 18 kg. If you drop 
or tip over the device, it may damage it.

• The temperature of the product’s body

becomes a little higher after a long period use. 
This phenomenon indicates that heat exchange 
in normal working mode, thus please do not 
let children or anyone who is sensitive of 
temperature to touch.

• Please allow at least a 5 hour wait at room

temperature before switching on the power 
after transpoting or storing the TV at below 
zero temperatures.

All images provided herein are schematic 

drawings and may differ from of real objects.

Installation

Wall mounting

For wall mounting the back panel of this unit 

is equipped with a VESA slot. A 100*100 mm 

VESA wall-mount bracket should be used for 

wall mounting. The wall-mounting bracket is not 

included and should be acquired separately. 

Manufacturer is not responsible for improper 

mounting resulting in a damage to the unit.

Stand installation

Cover a flat stable surface with a soft cloth. 

Place the TV unit facedown on the cloth. Insert 
double support legs and fix them with 4

ST4X14 mm

 screws as shown below.

Wall or ceiling mounting implements 

must be durable and sufficient enough 
to support the weight of the unit.