Telefunken TF-LED22S1 - Инструкция по эксплуатации - Страница 4

Before you start

4

Before you start

Installation

Wall mounting

For wall mounting the back panel of this unit 

is equipped with 4 screw holes. A wall-mount 
bracket should be used for wall mounting (the 
bracket is not included and should be acquired 
separately). Manufacturer is not responsible 
for improper mounting resulting in damage of 
the unit.

Stand installation

Place the LED TV on a solid flat surface. 

Use soft material to place over the front screen 
to avoid any damage. Then put the slits of the 
stand onto the fixing elements in the lower part 
of the unit until a click and fix the two parts by 
screws as shown below:

as well as the damage to the product. 
•  Please place the product on a flat surface 

in a well-ventilated location. Keep it away from 
the burning-light, direct sunlight, vibration, 
high-temperature and humidity.

•  Do not place any vase, potted plant, cup, 

medicine and any container with water on this 
product. If the liquid is spilt, it may cause the 
fire, electric shock or breakdown.

•  Do not install it at the place on the strong 

magnetic field or current field. It may cause 
break down. This equipment may be observed 
deterioration of the picture by electromagnetic 
radiation in electromagnetic environment.

•  Fasten the wheel of the product or shelf 

with wheels when installing this product. If it 
moves or is tipped over, it may be damaged.

•  Do not place any fire source such as 

candlelight close to this product or place it on 
this product. If it is tipped over or fallen down, it 
may cause damage or fire.

•  Do not place the unit into closed space 

of TV for better ventilation; it can reduce the 
product lifetime. Keep a space at least 10 cm 
at above, left and right of the TV.

•  Please place all the signal cords behind of 

rear panel.

•  Do not overexert or touch the panel when 

you convey the product. Do not transfer the 
LCD TV up or down display direction.

•  Do not transport it with the power cord 

connected. If you move this product with the 
power cord or the connection cable connected, 
the damaged power cord, connection cable 
or connection terminal may cause the fire, the 
electric shock or breakdown.

•  2 persons or more shall transport the 

device, which is heavier than 18 kg. If you drop 
or tip over the device, it can be damaged.

•  The temperature of the product’s body 

becomes a little higher after a long period use. 
This phenomenon indicates that heat exchange 
in normal working mode, thus please do not 
let children or anyone who is sensitive of 
temperature to touch.

All images provided herein are schematic 

drawings and may differ from of real objects.