LED Samsung UE32N4010AUXCE - Инструкция по эксплуатации - Страница 56

Others

The picture will not display in full screen.

• HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.

• Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV.

• Adjust the picture size options on your external device or TV to full screen.

The remote control does not work.

• Replace the remote control batteries with the poles (+/–) in the right direction.

• Clean the sensor’s transmission window on the remote.

• Try pointing the remote directly at the TV from 1.5 ~ 1.8 m away.

The cable box or satellite box remote control doesn’t turn the TV on or off, or adjust the volume.

• Programme the cable box or satellite box remote control to operate the TV. Refer to the cable box or 

satellite box user manual for the SAMSUNG TV code.

A “Mode Not Supported” message appears.

• Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly.

There is a plastic smell from the TV.

• This smell is normal and will dissipate over time.

The TV Signal Information is unavailable in the Self Diagnosis Test menu.

• This function is only available with digital channels from an Aerial / RF / Coax connection.

TV is tilted to the right or left side.

• Remove the stand base from the TV and reassemble it.

There are difficulties assembling the stand base.

• Make sure the TV is placed on a flat surface. If you can not remove the screws from the TV, please use a 

magnetised screw driver.

The Broadcasting menu is grey out (unavailable).

• The 

Broadcasting

 menu is only available when the TV source is selected.

The CI+ does not work.

• Your Samsung TV conforms to the CI+ 1.3 standards.

• Where a CI+ Common Interface module is incompatible with this device then please remove the module 

and contact the CI+ operator for assistance.

English - 22