LED Samsung UE32N4010AUXCE - Инструкция по эксплуатации - Страница 54

There is poor colour or brightness.

• Adjust the 

Picture

 options in the TV menu. (go to 

Picture Mode

 / 

Colour

 / 

Brightness

 / 

Sharpness

)

• Adjust 

Energy Saving

 option in the TV menu. (go to 

MENU

m

 - 

System

 - 

Eco Solution

 - 

Energy Saving

)

• Try resetting the picture to view the default picture settings. (go to 

MENU

m

 - 

Picture

 - 

Reset Picture

)

There is a dotted line on the edge of the screen.

• If the picture size is set to 

Screen Fit

, change it to 

16:9

.

• Change the cable box or satellite box resolution.

The picture is black and white.

• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component 

input 1 on the TV.

When changing channels, the picture freezes or is distorted or delayed.

• If connected with a cable box or satellite box, please try to reset the cable box or satellite box. Reconnect 

the AC cord and wait until the cable box or satellite box reboots. It may take up to 20 minutes.

• Set the output resolution of the cable box or satellite box to 1080i or 720p.

Sound Quality

• First of all, please perform the 

Sound Test

 to confirm that your TV audio is properly operating. (go to 

MENU

m

 - 

Support

 - 

Self Diagnosis

 - 

Sound Test

)

• If the audio is ok, the sound problem may be caused by the source or signal.

There is no sound or the sound is too low at maximum volume.

• Please check the volume of the device (cable box or satellite box, DVD, Blu-ray etc) connected to your TV.

The picture is good but there is no sound.

• Set the 

Sound Output

 option to 

TV Speaker

 in the sound menu.

• If you are using an external device, make sure the audio cables are connected to the correct audio input 

jacks on the TV.

• If you are using an external device, check the device’s audio output option (ex. you may need to change your 

cable box's or satellite box's audio option to HDMI when you have a HDMI connected to your TV).

• If you are using a DVI to HDMI cable, a separate audio cable is required.

• Reboot the connected device by reconnecting the device’s power cable.

The speakers are making an inappropriate noise.

• Check the cable connections. Make sure a video cable is not connected to an audio input.

• For aerial or cable connections, check the signal strength. Low signal level may cause sound distortion.

English - 20