Телевизоры кинескопные Philips 29PT8608 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
4
Choice of language and country
Automatic installation
Reshuffle programmes
The first time you switch on the television, the
language menu will appear and the languages
will change in succession. Go straight to step
“
.
Alternatively :
&
To select the
INSTALLATION
menu, press the
¢
and
Ê
keys on the remote control at the
same time.
é
With the cursor, select
LANGUAGE
and press
u
. The list of languages is displayed.
“
Select your language with the up/down cursor
and press
u
. The menus will appear in the
selected language.
‘
With the cursor, select
COUNTRY
and press
u
.
(
Select your country with the up/down cursor
and press
u
.
This setting is used for the tuning, the automatic
installation of programmes and teletext. If your
countr y does not appear on the list, select
Other
.
Also see : EasyLink Function page 7.
§
If you wish to exit the menus, press
H
several
times.
This menu allows automatic tuning of all
programmes.
&
First select the language and country, then :
é
With the cursor, select
Automatic installation
and press
u
.
“
Select
Start
and press
u
. The tuning starts.
After a few minutes, the list of programmes
that have been found is displayed.
‘
If the transmitter or cable network transmits
an automatic signal (ACI), the programmes will
be numbered correctly.
The installation is complete.
(
Without ACI broadcast, the programmes are
numbered according your language and
country selection.You can use
Reshuffle
to
renumber them.
Some transmitters or cable networks broadcast
their own selection menu (region, language, ...). In
this case, indicate your choice by using the cursor
and validate with
u
. To exit or pause a search
press
H
. If no picture is found, see Tips (p.12).
Also see : EasyLink Function page 7.
§
To exit, press
H
repeatedly.
This menu allows you to change the
programme numbers.
From the
Installation
menu
(to select press
¢
and
Ê
at the same time)
:
&
Select
Reshuffle
and press
u
.
é
Select the programme you wish to change with
the up/down cursor and validate with
u
.
“
Use the up/down cursor to select the new
number and press
u
. The two programmes
are exchanged.
‘
Repeat steps
é
and
“
for all the
programmes that require renumbering.
(
To exit, press
H
several times.
See also : EasyLink Function page 7.
INSTALLATION
B
Menu language
Country
Automatic installation
Manual installation
Give name
Reshuffle
Favourite programmes
SETUP
Menu language
Dansk
Deutsch
B
English
Æ
Español
Français
Italiano
Magyar
INSTALLATION
Menu language
Country
B
Automatic installation
Manual installation
Give name
Reshuffle
Favourite programmes
SETUP
Automatic installation
B
Start
OK
Æ
Stop
TV is searching
One moment please ...
