Makita HG6031VK - Инструкция по эксплуатации - Страница 3

3 English

ORIGINAL INSTRUCTIONS

INTENDED USE

Your heat gun has been designed for stripping paint, 

soldering pipes, shrinking PVC, welding and bending 

plastic as well as general drying and thawing purposes.

WARNING:

 Read this manual and 

general safety Instructions carefully 

before using the appliance, for your 

own safety. Your power tool should 

only be passed on together with these 

instructions.
The tool should be connected only to 

a power supply ofthe same voltage as 

indicated on the nameplate, and can 

only be operated on single-phase AC 

supply. They are double-insulated and 

can, therefore, also be used from sock-

ets without earth wire.

Hot surfaces - Burns to fingers or hands.

DESCRIPTION

1

 Nozzle

2

  On/off switch (0/1/2)    HG5030 & HG6031V 

On/off switch (0/1/2/3) HG6030

3

  Front cover

4

 Dial

PACKAGE CONTENT LIST

Q

Check the appliance, the power cord, the power 

plug and all accessories for transportation 

damages.

WARNING:

Packing materials are 

not toys! Children must not play with 

plastic bags! Danger of suffocation!

• 

1 Heat gun

• 

1 Set of accessories (Accessories may not be 

necessarily be included)

• 

1 Instruction manual

When parts are missing or damaged, 

please contact your dealer.

GENERAL POWER TOOLSAFETY 

WARNINGS

Read all safety warnings and all instructions. 

Failure to 

follow all warnings and instructions may result in electric 

shock, fire and/or serious injury.

Save all warnings and instructions for future 

reference. 

The term “power tool” in the warnings refers to your 

mains operated (corded) power tool or battery operated 

(cordless) power tool.

Work area

Q

 Keep work area clean and well lit.

 Cluttered and 

dark areas invite accidents.

Q

Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable 

liquids, gases or dust.

 Power tools create sparks 

which may ignite the dust or fumes.

Q

Keep children and bystanders away while 

operating a power tool. 

Distractions can cause 

you to lose control.

Electrical safety

Q

Power tool plugs must match the outlet. Never 

modify the plug in any way. Do not use any 

adapter plugs with earthed (grounded) power 

tools.

 Unmodified plugs and matching outlets will 

reduce risk of electric shock.

Q

Avoid body contact with earthed or grounded 

surfaces such as pipes, radiators, ranges and 

refrigerators.

 There is an increased risk of elec-

tric shock if your body is earthed or grounded.

Q

Do not expose power tools to rain or wet 

conditions.

 Water entering a power tool will 

increase risk of electric shock.

Q

Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. 

Keep cord away from heat, oil, sharp edges 

or moving parts. 

Damaged or entangled cords 

increase the risk of electric shock.

Q

When operating a power tool outdoors, use an 

extension cord suitable for outdoor use.

 Use of 

a cord suitable for outdoor use reduces the risk of 

electric shock.

Q

 If operating a power tool on a damp location 

is unavoidable, use a residual current device 

(RCD) protected supply.

 Use of an RCD reduces 

the risk of electric shock.

Personal safety

Q

Stay alert, watch what you are doing and use 

common sense when operating a power tool. 

Do not use a power tool while you are tired or 

under the influence of drugs, alcohol or med

-

ication.

 A moment of inattention while operating 

power tools may result in serious personal injury.

Q

Use safety equipment. Always wear eye pro-

tection.

 Safety equipment such as dust mask, 

non-skid safety shoes, hand hat, or hearing 

protection used whenever conditions require will 

reduce personal injuries.

Q

Avoid accidental starting.Ensure the switch is 

in the off position before plugging in.

Carrying 

power tools with your finger on the switch or plug

-

ging in power tools that have the switch on invites 

accidents.

Q

Remove any adjusting key or wrench before 

turning the power tool on.

 A wrench or a key left 

attached to a rotating part of the power tool may 

result in personal injury.

Q

Do not overreach. Keep proper footing and 

balance at all times. 

This enables better control 

of the power tool in unexpected situations.