Makita CL121DWA - Инструкция по эксплуатации - Страница 13

13 ENGLISH

Disposing of dust

CAUTION:

Empty the dust bag or replace the 

paper filter before it becomes full. If not, the suc

-

tion force weakens.

CAUTION:

When closing the dust case cover, 

be careful not to pinch your fingers.

NOTICE:

Never throw away the dust stopper 

because it should be used whenever either the 

dust bag or the paper filter is used.

NOTICE:

When the dust bag/paper filter is not 

inside of the cleaner, the dust case cover does 

not close completely. Do not force to close the 

dust case cover. It may result in deforming or 

breakage of the tool.

NOTICE:

When disposing of dust, also clean the 

room for the dust bag/paper filter.

 The remaining 

dust and dirt in the room may cause the sponge filter 

to be clogged or the motor to be damaged.

1.

Open the dust case cover.

► 

Fig.27:

1.

 Dust case cover

2.

Pull out both the orange-colored dust stopper and 

dust bag/paper filter together at the same time.

► 

Fig.28:

1.

 Dust stopper

3.

When using the dust bag

Remove the dust stopper and empty the dust bag.

► 

Fig.29:

1.

 Dust stopper 

2.

 Dust bag

When using the paper filter

Remove the dust stopper and dispose of the paper filter.

► 

Fig.30:

1.

 Dust stopper 

2.

 Paper filter

4.

Place the dust bag/new paper filter and dust stopper 

together into the cleaner and close the dust case cover.

Using as a blower

CAUTION:

Never point the nozzle at anyone 

in the vicinity.

CAUTION:

Do not use the cleaner for blowing 

air into objects, like rubber rafting, balls or other 

inflatable products.

 Increased motor revolution may 

cause dangerous fan breakage.

Installing or removing the blower 

attachment

To attach the blower attachment, align the protrusion of 

the blower attachment port with the groove on the vent, 

and then push it until clicks.

► 

Fig.31:

1.

 Blower attachment

To remove the blower attachment, pull the port down-

ward while pressing its top as illustrated.

► 

Fig.32

Blowing

Point the tip of blower attachment to the object to blow 

off and then turn on the tool.

► 

Fig.33

MAINTENANCE

CAUTION:

Always be sure that the tool is 

switched off and the battery cartridge is removed 

before attempting to perform inspection or 

maintenance.

NOTICE:

Never use gasoline, benzine, thinner, 

alcohol or the like. Discoloration, deformation or 

cracks may result.

To maintain product SAFETY and RELIABILITY, 

repairs, any other maintenance or adjustment should 

be performed by Makita Authorized or Factory Service 

Centers, always using Makita replacement parts.

Cleaning

From time to time wipe off the outside (cleaner body) of 

the cleaner using a cloth dampened in soapy water.

Clean out also the suction opening, dust bag/paper filter 

mounting area and the dust stopper.

► 

Fig.34

Wash the dust bag in soapy water when it is clogged with 

dust and the cleaner power becomes weak. Dry it out thor-

oughly before use. An insufficiently dried filter may cause 

poor suction and shorten the service life of the motor.

► 

Fig.35

NOTE:

 Paper filter is a throw-away type.

When the sponge filter is clogged with dust, remove it 

from the cleaner and then wipe it off or wash in water.

Removing and installing the sponge 

filter

CAUTION:

After cleaning sponge filter, be 

sure to install it on the cleaner.

 If washed in water, 

dry it up before installing. An insufficiently dried 

sponge filter may shorten the service life of the motor.

To remove the sponge filter, remove the dust bag or 

paper filter and then pinch and take it out.

► 

Fig.36:

1.

 Sponge filter

Press in the whole edge of the sponge filter against the 

recessed wall inside the dust bag/paper filter mounting 

area.

► 

Fig.37:

1.

 Recessed wall

Storage

WARNING:

Never leave the battery cartridge 

and charger in a car.

 The temperature inside a car 

sitting in the sun may exceed 50 °C (122 °F). It may 

cause the battery cartridge deteriorated and result in 

liquid ejection, smoke emission or a fire.

► 

Fig.38

WARNING:

Never use the charger in a stor-

age bag.

 Blocking the air vent may result in smoking 

emission or a fire.

► 

Fig.39