Bort BAX-1520 - Инструкция по эксплуатации - Страница 8

8

power tools with your fi nger on the switch or energising 

power tools that have the switch on invites accidents .

• Remove any adjusting key or wrench before turning the
• power tool on . A wrench or a key left attached to a rotat-

ing part of the power tool may result in personal injury .

• Do not overreach . Keep proper footing and balance at

all times . This enables better control of the power tool in 

unexpected situations .

• Dress properly . Do not wear loose clothing or jewellery . 

Keep your hair, clothing and gloves away from mov-ing

parts . Loose clothes, jewellery or long hair can be caught 

in moving parts .

• If devices are provided for the connection of dust extrac- 

tion and collection facilities, ensure these are connected

and properly used . Use of dust collection can reduce dust-

related hazards .

Power tool use and care

• Do not force the power tool . Use the correct power tool

for your application . The correct power tool will do the job 

better and safer at the rate for which it was designed .

• Do not use the power tool if the switch does not turn it on 

and off  . Any power tool that cannot be controlled with

the switch is dangerous and must be repaired .

• Disconnect the plug from the power source and/or the

battery pack from the power tool before making any

adjustments, changing accessories, or storing power

tools . Such preventive safety measures reduce the risk of 

starting the power tool accidentally .

• Store idle power tools out of the reach of children and do 

not allow persons unfamiliar with the power tool or these 

instructions to operate the power tool . Power tools are

dangerous in the hands of untrained users .

• Maintain power tools . Check for misalignment or bind- 

ing of moving parts, breakage of parts and any other

condition that may aff ect the power tool’s operation . If

damaged, have the power tool repaired before use . Many 

accidents are caused by poorly maintained power tools .

• Keep cutting tools sharp and clean . Properly maintained

cutting tools with sharp cutting edges are less likely to

bind and are easier to control .

• Use the power tool, accessories and tool bits etc . in

accordance with these instructions, taking into account

the working conditions and the work to be performed . 

Use of the power tool for operations diff erent from those 

intended could result in a hazardous situation .

Service

Have your power tool serviced by a qualifi ed repair person 

using only identical replacement parts . This will ensure that 

the safety of the power tool is maintained .

SAFETY WARNINGS FOR VACUUM CLEANERS

This vacuum cleaner complies with the generally accepted 

standards of technology and relevant safety regulations .

• Always observe the information on the rating plate when 

using the vacuum cleaner and connecting to the power

supply .

• Never use the vacuum cleaner without a dust bag fi tted . 

=> This can damage the appliance .

• The appliance may be used by children over the age of

8 years and by persons with reduced physical, sensory or 

mental capacity or by persons with a lack of experience or 

knowledge if they are supervised or have been instructed 

on the safe use of the appliance and the have under-stood 

the potential dangers of using the appli-ance .

• Children must never play with the appliance
• Cleaning and user maintenance must never be carried out 

by children without supervision .

• The vacuum cleaner may not be used for:

•  cleaning persons or animals, 

• vacuuming up:

- hazardous, sharp-edged, hot or red hot substances .

- damp or liquid substances

- highly fl ammable or explosive substances and gases

- ash, soot from tiled stoves and central heating systems

- toner dust from printers and copiers .

• Keep suction away from your head 

when using the handle, nozzles or pipe . 

=> Risk of injury .

• Stand the appliance on a fi rm, secure surface when

vacuuming .

• When vacuuming stairs, the appliance must always be

lower down than you .

• In the following cases, stop using the appliance

immediately and contact the after-sales service:

- if the mains connection cable is damaged .

- if you have accidentally vacuumed up some liquid or

liquid has entered the inside of the appliance

- if the appliance has been dropped .

• Do not use the power cord to carry the vacuum cleaner .
• Fully extend the power cord when using the vacuum

cleaner continuously for several hours .

• When disconnecting the appliance from the mains, pull

on the plug, not the power cord .

• Do not pull the power cord around sharp corners or allow 

it to become trapped .

• Unplug the power cord from the mains before carrying

out any work on the vacuum cleaner or its accessories .

• Do not use the vacuum cleaner if it is damaged . Unplug

the power cord from the mains if a fault is detected .

• For safety reasons, only authorised after-sales service

personnel are permitted to carry out repairs and fi t

replacement parts to the vacuum cleaner .

• Protect the vacuum cleaner from outside weather

conditions, moisture and sources of heat .

• The vacuum cleaner is not suitable for use on building

sites . => Vacuuming up building rubble could damage

the appliance .

• Switch off  the appliance when it is not in use .
• At the end of its life, the appliance should be rendered

unusable, then disposed of in an appropriate manner .

• Plastic bags and fi lms must be kept out of the reach of

children before disposal (risk of suff ocation) .