Bort BAX-1520 - Инструкция по эксплуатации - Страница 7

7

English

Vacuum cleaner for dry and wet 

cleaning

Intended Use

• This vacuum cleaner is intended for domestic use

only . Only use this vacuum cleaner in accordance 

with the in-structions in this instruction manual . 

The vacuum cleaner is suitable for vacuuming dry ma-

teri-als and, by taking suitable measures, also for vacuum-

ing  liquids .  The manufacturer will not accept any respon-

sibility for damage caused by improper use or incorrect 

operation . Therefore, you must note the following points . 

The vacuum cleaner must only be operated with:

The vacuum cleaner must only be operated with:

• Manufacturer’s original dust bags

• Manufacturer’s original replacement parts, accessories or 

special accessories

• The fi lter cleaning system (FCS +) is designed for use in

conditions where a large amount of fi ne dust is sucked

in without a fi lter bag . The FCS + fi lter cleaning system

allows the HEPA fi lter to be cleaned of dust deposits by

reversing the air flow .

• The vacuum cleaner has a socket with a protective IP54

contact . It can include an external power tool . Pay atten-

tion to the maximum permissible total power consump-

tion of the connected power tool .

Technical specifications (fig. 1)

Product elements (fig. 2)

1 . Suction inlet

2 . Top housing 

3 . On/off switch

4 . Carry handle 

5 . Tank 

6 . Bottom chassis

7 . Rear wheel

8 . Castor

9 . water brush 

10 .  Metal Telescopic tube 

11 .  Crevice nozzle

12 .  Hose

13 .  Carpet/hard floor brush

14 .  2-in-1 Nozzle

15 .  Water cut out sensor(probe)

16 .  HEPA

17 .  HEPA hook

18 .  Blow outlet

19 .  Head lock
20 .  Socket 

The complete set includes:

• Hose

• Plastic tube

• Floor brush

• Crevice nozzle

• Brush

• HEPA filter

GENERAL POWER TOOL SAFETY 

WARNINGS

Read all safety warnings and all instructions .

Failure to follow the warnings and instructions may 

result in electric shock, fi re and/or serious injury . 

Save all warnings and instructions for future reference . The 

term “power tool” in the warnings refers to your main-sop-

erated (corded) power tool or battery-operated (cord-less) 

power tool .

Work area safety

• Keep work area clean and well lit . Cluttered or dark areas 

invite accidents .

• Do not operate power tools in explosive atmospheres,

such as in the presence of fl ammable liquids, gases or

dust . Power tools create sparks which may ignite the dust 

or fumes .

• Keep children and bystanders away while operating a

power tool . Distractions can cause you to lose control .

Electrical safety

• Power tool plugs must match the outlet . Never modify

the plug in any way . Do not use any adapter plugs with

earthed (grounded) power tools . Unmodifi ed plugs and

matching outlets will reduce risk of electric shock .

• Avoid body contact with earthed or grounded surfaces,

such as pipes, radiators, ranges and refrigerators . There is 

an increased risk of electric shock if your body is earthed 

or grounded .

• Do not expose power tools to rain or wet conditions . 

Water entering a power tool will increase the risk of

electric shock .

• Do not abuse the cord . Never use the cord for carrying,

pulling or unplugging the power tool . Keep cord away

from heat, oil, sharp edges and moving parts . Damaged or 

entangled cords increase the risk of electric shock .

• When operating a power tool outdoors, use an extension 

cord suitable for outdoor use . Use of a cord suitable for

outdoor use reduces the risk of electric shock .

• If operating a power tool in a damp location is unavoid- 

able, use a residual current device (RCD) protected sup-

ply . Use of an RCD reduces the risk of electric shock .

Personal safety

• Stay alert, watch what you are doing and use common

sense when operating a power tool . Do not use a power 

tool while you are tired or under the infl uence of drugs, 

alcohol or medication . A moment of inattention while op-

erating power tools may result in serious personal injury .

• Use personal protective equipment . Always wear eye

protection . Protective equipment such as dust mask, non-

skid safety shoes, hard hat, or hearing protection used for 

appropriate conditions will reduce personal injuries .

• Prevent unintentional starting . Ensure the switch is in

the off -position before connecting to power source and/

or battery pack, picking up or carrying the tool . Carrying