Gaggenau WM260162 - Инструкция по эксплуатации - Страница 51

Positioning and connecting       

en

51

Water inlet

:

Warning

Danger of death!

There is a risk of electric shock if you 

touch live components.

Do not immerse the Aqua-Stop safety 

valve in water (it contains an electric 

valve).

Notes

■

Only operate the washing machine 

using cold mains water.

■

Do not connect the machine to the 

mixer tap of an unpressurised hot-

water boiler.

■

Do not use a used supply hose. Only 

use the supply hose supplied or one 

that was purchased from an 

authorised specialist retailer.

■

Do not kink or squash the water 

supply hose. 

■

Do not alter (shorten, cut through) 

the water supply hose (otherwise its 

strength is no longer guaranteed).

■

Only tighten the screw connections 

by hand. If the screw connections 

are tightened too much with a tool 

(pliers), the thread may become 

damaged.

■

When connecting to a 21 mm = ½" 

tap, first fit an adapter* with a sealing 

washer from 21 mm = ½" to 

26.4 mm = ¾".

*supplied depending on the model

Optimum water pressure in the supply 

network
At least

 100 kPa (1 bar)

Maximum

 1000 kPa (10 bar)

When the tap is open, the water flow 

rate is at least 8 l/min.
If the water pressure is higher than this, 

a pressure-reducing valve must be 

installed.

Connection

Connect the water supply hose to the 

tap (26.4 mm = ¾") and to the 

appliance (not necessary for Aqua-Stop 

models as this is permanently installed):

■

Model: 

Standard

■

Model: 

Aqua-Secure

■

Model: 

Aqua-Stop

Note:  

Turn on the tap carefully, 

checking the leak tightness of the 

connection points. The screw 

connection is under mains water 

pressure.

PLQPP

ê

ë