Стиральная машина Gaggenau WM260162 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
en
Operating the appliance
30
Some programme sequence steps
explained:
■
Load adjust active
■
Pre-washing, Washing, Rinsing,
Spin, Drain
... are displayed during
the wash cycle.
■
Extra rinse: foam
Note:
Foam detection
If
Foam has been detected
also
appears on the display panel, the
washing machine has detected too
much foam during the wash
programme and has automatically
switched on one or more rinse
cycles in order to remove the foam.
Add less detergent to the next
washing cycle with the same load.
■
If you want to lock the programme to
prevent it from being inadvertently
adjusted, you can select the childproof
lock as follows.
Child lock
(
¯
3 sec.)
You can lock the washing machine to
prevent the functions you have set from
being changed inadvertently.
To
activate
/deactivate, press and hold
both buttons
Child lock
(
¯
3 sec.) for
approx. three seconds.
E
Childproof lock activated
appears in
the display panel.
After approx. three seconds, the display
reverts back to the main menu.
If you adjust the programme selector or
select a button when the childproof lock
is activated,
E
Childproof lock
activated
appears in the display panel.
Notes
■
The childproof lock can be activated
regardless of the appliance's status.
■
The childproof lock remains active,
even once the washing machine has
been switched off. Before selecting
the next programme, deactivate the
childproof lock.
■
If the appliance is switched off while
the programme is running and
childproof lock is activated, the
programme continues when the
appliance is switched back on.
Adding laundry
After starting the programme, you can
add or remove laundry if necessary.
Press the
A
button to do this.
The
A
button indicator lamp flashes
and the machine checks whether it is
possible to add laundry.
It is possible to add laundry when
Pause: Reload is possible
appears on
the display.
To continue the programme, press the
A
button. The programme continues
automatically.
Notes
■
Do not leave the door open for too
long when adding laundry as water
from the laundry may leak out.
■
For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
Follow the information on the display
panel.
■
The load display is not active during
reloading.
/RDGDGMXVWDFWLYH
&
K
c
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
