Hotpoint Ariston AQS73D29EU/B - Инструкция по эксплуатации - Страница 7

EN

7

7

WASH CYCLE 

SELECTOR

knob

Button with

ON/OFF 

indicator light

Touch control panel

Button with 

ON/OFF

 indicator light: press this briefly to switch 

the machine on or off. The green indicator light indicates that the 
machine is switched on. To switch off the washing machine during 
the wash cycle, press and hold the button for approximately 3 
seconds; if the button is pressed briefly or accidentally the machine 
will not switch off. If the machine is switched off during a wash 
cycle, this wash cycle will be cancelled.

WASH CYCLE SELECTOR

knob: may be turned in either 

direction. To select the most suitable wash cycle, please refer 
to the 

“Table of wash cycles”.

The knob will not move during the wash cycle.

M1-M2-M3

 buttons: press and hold one of the buttons to 

store a cycle with your own set preferences in the memory 
of the machine. To recall a previously-stored cycle, press the 
corresponding button.

TEMPERATURE

 button: press to modify or exclude the 

temperature setting; the value selected will appear on the 
display above 

(see “Running a wash cycle”).

SPIN CYCLE

 button: press to modify or exclude the spin 

cycle; the value selected will appear on the display above 

(see 

“Running a wash cycle”).

DELAYED START

 button: press to set a delayed start for 

the selected wash cycle; the set delay time will appear on the 
display above 

(see “Running a wash cycle”).

OPTION

 buttons: press to select the available options. The 

indicator light corresponding to the selected option will remain 
lit 

(see “Running a wash cycle”).

WASH CYCLE PHASE

 icons: these illuminate to indicate the 

progress of the wash cycle (Wash 

 – Rinse 

 – Spin 

 – 

Drain

). The text 

 lights up when the cycle is complete.

START/PAUSE 

button with indicator light: when the green 

indicator light flashes slowly, press the button to start a wash 
cycle. Once the cycle has begun the indicator light will remain 
lit in a fixed manner. To pause the wash cycle, press the 
button again; the indicator light will flash in an orange colour. If 

the “LOCK”   indicator light is switched off, the door may be 
opened. To start the wash cycle from the point at which it was 
interrupted, press the button again.

LOCK

indicator light: indicates that the porthole door is 

locked. To open the door, pause the wash cycle (see “

Running 

a wash cycle

”).

CONTROL PANEL LOCK

 button with indicator light: to 

activate or deactivate the control panel lock, press and hold 
the button for approximately 2 seconds. when the indicator 
light is illuminated, the control panel is locked (apart from the 
ON/OFF button). This means it is possible to prevent wash 
cycles from being modified accidentally, especially where there 
are children in the home.

ECO

 indicator light: the 

 icon lights up when, after altering the 

washing parameters, an energy saving of at least 10% is made. 
Furthermore, before the machine enters “Standby” mode, the 
icon will light up for a few seconds; when the machine is switched 
off the estimated energy saving will be around the 80% mark.

CHANGE LANGUAGE

s

The first time the machine is 

switched on, 

the first language will flash on the display. The 

“ “, “

OK

” and “

V

” symbols will appear on the display, in line 

with the 3 buttons on the right-hand side. The languages 
change automatically every 3”; alternatively, they can be 
changed by pressing the buttons next to the “ “ and “

V

” 

symbols. Use the “

OK

” button to confirm the language, which 

will be set after 2”. If no buttons are pressed, the automatic 
language change will begin again after 30”.

To change the language, switch the machine on and off 
again; in the 30” time period after it has been switched 
off, press and hold

 the temperature 

 +spin 

+delayed   start buttons simultaneously for 5’’. A short 
sound alert will be emitted and the set language will flash 
on the display.

 Press the buttons next to the “ “ and “

V

” 

symbols to change the language. Use the button next to the 
“

OK

” symbol to confirm the language, which will be set after 

2”. If no buttons are pressed, the language set previously will 
be displayed after 30”. 

Switch on the machine.

TEMPERATURE 

button

OPTION 

buttons 

SPIN 

button

DISPLAY

M1

M3

ECO 

indicator light

DELAYED START

button

START/PAUSE

button 

with indicator light

LOCK

indicator light

WASH 
CYCLE 
PHASE

icons

CONTROL PANEL LOCK 

button with indicator light

M2