Electrolux EWT 2852 EWW - Инструкция по эксплуатации - Страница 18

First try to find a solution to the problem

(refer to the table). If not, contact the

Authorised Service Centre.
With some problems, the acoustic
signals operate. The red indicator 

flashes and one of the indicators comes

on, to show an alarm code:

•

 - The appliance does not fill with

water properly.

•

 - The appliance does not drain the

water.

•

- The appliance lid or drum doors

are open or not closed correctly.

Please check both!

• The indicator of button Start/Pause

flashes in red 11 times and 1 (or 2 or

3) time(s) in yellow: the mains supply

is unstable. Wait until the mains

supply is stable and the appliance

automatically starts operating.

WARNING!

Deactivate the appliance

before you do the checks.

13.2 Possible failures

Problem

Possible solution

The programme does

not start.

• Make sure that the mains plug is connected to the

mains socket.

• Make sure that the appliance lid and drum doors are

closed properly.

• Make sure that there is not a damaged fuse in the fuse

box.

• Make sure that the Start/Pause has been pressed.

• If the delay start is set, cancel the setting or wait for the

end of countdown.

• Deactivate the Child Lock function if it is on.

The appliance does not

fill with water properly.

• Make sure that the water tap is open.

• Make sure that the pressure of the water supply is not

too low. For this information, contact your local water

authority.

• Make sure that the water tap is not clogged.

• Make sure that the filters of the inlet hoses and the fil‐

ters of the valves are not clogged. Refer to “Care and

cleaning”.

• Make sure that the inlet hose has no kinks or bends.

• Make sure that the connection of the water inlet hose is

correct.

The appliance does not

fill with water and drain

immediately.

• Make sure that the drain hose is in the correct position.

The hose may be too low. Refer to 'Installation instruc‐

tion'.

www.electrolux.com

18