Kraft KF-LX 7101 BW - Инструкция по эксплуатации - Страница 36

36

СТИРАЛЬНАЯ МАШИНА АВТОМАТ 

AUTOMATIC WASHING MACHINE

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ • USEr GUIdE

1.After the power is 

disconnected, use hand to

open the filter cover.

2.Turn the filter down as 

shown with the figure and

take out sundries matters.

3.Reinstall each part back 

after sundries matters are 

removed.

 Caution!

•    Make sure that valve cap and emergency drain hose are reinstalled properly, cap 

plates should be inserted aligning to hole plates otherwise water may leak;

•   Some machines don’t have emergency drain hose, rotate lower cover cap directly to 

make water run into basin.

•   When the appliance is in use and depending on the programme selected there can 

be hot water in the pump. Never remove the pump cover during a wash cycle, always 
wait until the appliance has finished the cycle, and is empty. When replacing the 
cover, ensure it is securely re-tightened.

CLEANING THE INLET FILTER

Note! • Inlet filter must be cleaned if there is less water.

Washing the filter in the tap

1. Close the tap.
2. Remove the water supply hose from the tap.
3. Clean the filter.
4. Reconnect the water supply hose.

Washing the filter in washing machine:

1.   Screw off the inlet pipe from the backside of the 

machine.

2.   Pull out the filter with long nose pliers and reinstall 

it back after being washed.

3.  Use the brush to clean the filter.
4.   Reconnect the inlet pipe.

CLEANING THE DRAIN PUMP FILTER

 NOTE!

Be careful of the hot water!

•   Allow detergent solution to cool down.
•   Unplug the machine to avoid electrical shock before washing.
•   Drain pump filter can filter the yarns and small foreign matters from the washing.
•   Clean the filter periodically to ensure the normal operation of washing machine.

Routine Maintenance