Leader VS325D - Инструкция по эксплуатации - Страница 45

Turning Square Corners

•

    Cut  out  approximately  2  cm  (51/64  inch)  from  the 

    corner, in line with the overedge seam edge. 

•  Sew one stitch beyond point (A) and stop. 

•  Raise needle and presser foot. 

•

  Pull  the  f

abr

ic  to  the  rear  of  the  machine  just 

   enough to release the thread caught on the finger 

   of the throat plate.

    Note:  Presser  foot  has 

bee

n  removed  to  show 

              detail.

•

    Turn  the 

fabric

  and  lower  the  presser  foot  so  that 

    the knife is positioned in line with the cut edge.

•  Pull slack threads up, then start to se

w.

•

    Fold  the 

fabric

  with  the  wrong  sides  together  and 

    sew.

•  Press the pin tucks in the same direction.

(1) Outside Corner

•  Cut fabric at seam edge. 

(2) Inside Corner

Cutting

line

Cut Slit

44

Cutting line

A

2 cm

2 cm