Шуруповерты STATUS MX1600 02470601 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

4
2. SAFETY ADVICE
2. SAFETY ADVICE
EN
3) PERSONAL SAFETY
• Stay alert, watch what you are doing and use common sense when operating
a power tool. Do not use a power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention while operating power
tools may result in serious personal injury.
• Use safety equipment. Always wear eye protection. Safety equipment such as
dust mask, non-skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
• Avoid accidental starting. Ensure the switch is in the off position before
plugging in. Carrying power tools with your finger on the switch or plugging in
power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may result
in personal injury.
• Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of these devices
can reduce dust related hazards.
4) POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it
• Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be
repaired.
• Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and easier to control.
5
EN
• Use the power tool, accessories and tool bits etc., in accordance with these
instructions and in the manner intended for the particular type of power tool,
taking into account the working conditions and the work to be performed.
Use of the power tool for operations different from intended could result in a
hazardous situation.
5) SERVICE
• Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is
maintained.
MIXER SAFETY WARNINGS
During operation provide eye protection to prevent eyes from exposure to
flying particles.
Wear goggles.
Take protective measures against inhalation of dust.
Some materials can
contain toxic ingredients.
• Use of protective gloves is recommended.
WARNING:
Before connecting a tool to a power source be sure that the voltage
supply is the same as that specified on the nameplate of the tool.
• A power source with a voltage greater than that specified for the tool can result
in serious injury to the user, as well as damage to the tool.
• If in doubt, do not plug in the tool.
• Using a power source with a voltage less than the nameplate rating is harmful
to the motor.
• Fully unwind cable drum extensions to avoid potential overheating.
• When an extension cable is required, you must ensure that it has the right
ampere rating for your power tool and it is in safe electrical condition.
WARNING:
Always switch off and unplug the power tool prior to any adjustment,
servicing or maintenance or in case of mains drop-out.
• Never switch on the machine under load and leave it down only after final arrest.
• When working with the machine, always hold it firmly with both hands and
provide for a secure stance.
• Keep the power tool away from your body and keep your hands away from
rotating parts of the machine.
• In case the power tool should fall into the material to be stirred, pull the plug
immediately and have the power tool checked by an aftersales service agent.
Material that has penetrated the power tool can cause damage and lead to an
electric shock.
• During operation in a dusty environment keep the ventilation slots clean.
If cleaning is necessary, first switch the supply off and use nonmetal objects to
clean the vents, taking care not to damage the internal machine parts.
• Always keep the cord away from the working area of the power tool.
• Never use the machine with a damaged cable. Do not touch the damaged
cable and pull the mains plug when the cable is damaged while operating.