Stanley STDH5510 - Инструкция по эксплуатации - Страница 5

5

ENGLISH

Read 

Instructions 

M

anual

Use Eye 

Protection
Use Ear 

Protection

V ........   Volts         
A ........  Amperes

Hz .......  Hertz
W ........  Watts
min .....  minutes

.....  Alternating  

Current

.....  Direct  

Current 

n

0

  .......  No-Load 

Speed

 ......  Class II 

Construction

....  Earthing  

Terminal

....  Safety Alert 

Symbol

...

/

min..  Revolutions  

or Recipro- 

cation per  

minute

Labels on tool

The label on your tool may include the following symbols:

Position of date barcode

The Date Code, which also includes the year of 

manufacture, is printed into the housing.

Example:

2014 XX JN

             Year of manufacturing

(Original instructions)

g.  If devices are provided for the connection of dust 

extraction and collection facilities, ensure these are 

connected and properly used.

 Use of dust collection 

can reduce dust-related hazards.

4.  Power tool use and care
a.  Do not force the power tool. Use the correct power 

tool for your application.

 The correct power tool will do 

the job better and safer at the rate for which it was 

designed.

b.  Do not use the power tool if the switch does not turn 

it on and off.

 Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired.

c.  Disconnect the plug from the power source and/or 

the battery pack from the power tool before making 

any adjustments, changing accessories, or storing 

power tools.

 Such preventive safety measures reduce 

the risk of starting the power tool accidentally.

d.  Store idle power tools out of the reach of children 

and do not allow persons unfamiliar with the power 

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained 

users.

e.  Maintain power tools. Check for misalignment or 

binding of moving parts, breakage of parts and any 

other condition that may affect the power tools 

operation. If damaged, have the power tool repaired 

before use.

 Many accidents are caused by poorly 

maintained power tools.

f.  Keep cutting tools sharp and clean.

 Properly 

maintained cutting tools with sharp cutting edges are 

less likely to bind and are easier to control.

g.  Use the power tool, accessories and tool bits etc. in 

accordance with these instructions, taking into 

account the working conditions and the work to be 

performed.

 Use of the power tool for operations 

different from those intended could result in a hazardous 

situation.

5.  Service
a.  Have your power tool serviced by a qualified repair 

person using only identical replacement parts.

 This 

will ensure that the safety of the power tool is 

maintained.

Additional power tool safety warnings

Warning!

 Additional safety warnings for grinding, 

sanding, wire brushing, polishing or abrasive 

cuttingoff operations

•  Wear ear protectors.

 Exposure to noise can cause 

hearing loss.

• 

Use auxiliary handles supplied with the tool.

 Loss of 

control can cause personal injury.

• 

Hold power tool by insulated gripping surfaces when 

performing an operation where the cutting accessory 

may contact hidden wiring or its own cord.

Cutting 

ac-cessory contacting a "live" wire may make exposed 

metal parts of the power tool "live" and could give the 

operator an electric shock.

•  Use clamps or another practical way to secure and 

support the workpiece to a stable platform.

 Holding 

the work by hand or against your body leaves it unstable 

and may lead to loss of control.

•  Before drilling into walls, floors or ceilings, check for the 

location of wiring and pipes.

•  Avoid touching the tip of a drill bit just after drilling, as it 

may be hot.

•  This Tool is not intended for use by persons (including  

children) with reduced physical, sensory or metal 

capabilities, or lack of experience and knowledge, unless 

they have been given supervision or instruction 

concerning use of the appliance by a person responsible 

for their safety. Children should be supervised to ensure 

that ther do not play with the appliance.

•  The intended use is described in this instruction manual. 

The use of any accessory or attachment or performance 

of any operation with this tool other than those 

recommended in this instruction manual may present a 

risk of personal injury and/or damage to property.