Stanley SDR1400 - Инструкция по эксплуатации - Страница 8

ENGLISH  

(Original instructions)

8

Maintenance

♦ Before and after each use, check the product and 

accessories (or attachments) for wear and damage. If 

required, exchange them for new ones as described 

in this instruction manual. Observe the technical 

requirements.

Repair

This product does not contain any parts that can be 

repaired by the consumer. Contact an authorised service 

centre or a similarly qualified person to have it checked and 

repaired.

Storage

♦ Switch the product off and disconnect it from the power 

supply.

♦ Clean the product as described above.

♦ Store the product and its accessories in a dark, dry, 

frostfree, well-ventilated place. Always store the 

product in a place that is inaccessible to children. The 

ideal storage temperature is between 10°C and 30°C.

♦ We recommend using the original package for storage 

or covering the product with a suitable cloth or 

enclosure to protect it against dust.

Transportation

♦ Switch the product off and disconnect it from the power 

supply.

♦ Attach transportation guards, if applicable.

♦ Always carry the product by its handles (2).

♦ Protect the product from any heavy impact or strong 

vibrations which may occur during transportation in 

vehicles.

♦ Secure the product to prevent it from slipping or falling 

over.

Troubleshooting

Suspected malfunctions are often due to causes that the 

users can fix themselves. Therefore check the product 

using this section. In most cases the problem can be solved 

quickly.

Problem

Possible 

Cause

Solution

Product does not 

start

Not connected to 

power

supply

Connect to power

supply

Power cord or 

plug is

defective

Check by a 

specialist

electrician

Other electrical 

defect to

the product

Check by a 

specialist

electrician

Product does not

reach full power

Extension cord 

not suitable for 

operation with 

this product

Use a proper

extension cord

Power source 

(e.g.

generator) has 

too low

voltage

Connect to 

another

power source

Air vents are 

blocked

Clean the air 

vents

Unsatisfactory

result

Stirrer is worn

Replace with new

one

Stirrer not 

suitable for

material to be 

mixed

Use proper stirrer

Maintenance

Your tool has been designed to operate over a long period 

of time with a minimum of maintenance. Continuous 

satisfactory operation depends upon proper tool care and 

regular cleaning.

Warning! 

Before performing any maintenance, switch off

and unplug the tool.

♦ Regularly clean the ventilation slots in your tool using a 

soft brush or dry cloth.

♦ Regularly clean the motor housing using a damp cloth. 

Do not use any abrasive or solvent-based cleaner.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you find one day that your Stanley product needs 

replacement, or if it is of no further use to you, do not 

dispose of it with household waste. Make this product 

available for separate collection.

Separate collection of used products and

packaging allows materials to be recycled and

used again. Re-use of recycled materials helps

prevent environmental pollution and reduces the

demand for raw materials.

Local regulations may provide for separate collection of 

electrical products from the household, at municipal waste 

sites or by the retailer when you purchase a new product

Remarks

♦ Stanley’s policy is one of continuous improvement 

to our products and as such, we reserve the right to 

modify product specifications without prior notice.