Stanley SDR1400 - Инструкция по эксплуатации - Страница 5

ENGLISH  

(Original instructions)

5

d.   Store idle power tools out of the reach of children 

and do not allow persons unfamiliar with the power 

tool or these instructions to operate the power tool. 

Power tools are dangerous in the hands of untrained 

users.

e.   Maintain power tools. Check for misalignment or 

binding of moving parts, breakage of parts and 

any other condition that may affect the power tools 

operation. If damaged, have the power tool repaired 

before use. 

Many accidents are caused by poorly 

maintained power tools.

f.   Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting edges are 

less likely to bind and are easier to control.

g.   Use the power tool, accessories and tool bits etc. 

In accordance with these instructions, taking into 

account the working conditions and the work to 

be performed. 

Use of the power tool for operations 

different from those intended could result in a 

hazardous situation.

5. Service

a.   Have your power tool serviced by a qualified repair 

person using only identical replacement parts. 

This will ensure that the safety of the power tool is 

maintained.

Additional power tool safety warnings for paddle

mixer.

♦ Never clamp the product into a vice or to a work bench 

to use as a stationary tool. This may cause serious 

injury.

♦ Switch the product off immediately if the tool 

attachment jams. Be prepared for high reaction torques, 

which could cause kickbacks. The tool attachment will 

jam if the product is overloaded or becomes twisted in 

the workpiece.

♦ Wear protective clothing, dust masks and protective 

gloves when using this product. While this product is 

being used, dust may be created or splashing may 

occur and material or liquids may be flung around. 

Many types of dust are deemed to be carcinogenic.

♦ Always operate the product with both hands on the 

handles. Keep a firm grip on the handles and ensure 

you footing is secure on a stable, level and dry ground. 

Loss of control over the product can cause personal 

injury.

♦ Do not use this product to process substance which 

is highly flammable or potentially explosive such as 

solvents. Using this product will create sparks which 

can ignite vapours.

♦ Use this product indoors only. Moisture and rain can 

damage the product or can lead to electrocution. from 

the power supply, if stirred material penetrates into 

the inside of the product or if the product falls into the 

material being stirred. Have the product inspected by a 

professional electrician. Stirred material and moisture 

can damage the product or lead to electrocution, if they 

penetrate inside the product.

♦ Do not work with any substances which are harmful 

to health. Many materials are noxious when they 

are processed. Do not breathe in any unhealthy 

substances and avoid contact with your skin. Follow the 

manufacturers’ instructions and wear suitable personal 

protective equipment. 

♦ Wait until the product has come to a complete standstill, 

before removing it from the material being stirred and 

putting it down. The bucket can get jammed or stirred 

material can be flung around. This can lead to a loss of 

control over the product.

Residual risks.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks can not be avoided. These include:

♦ Injuries caused by touching any rotating/moving parts.

♦ Impairment of hearing.

♦ Risk of injury when changing any parts, or accessories.

♦ Health hazards caused by breathing dust developed 

when sawing wood, especially oak, beech and MDF.

♦ Injuries caused by prolonged use of a tool. When using 

any tool for prolonged periods ensure you take regular 

breaks.

Safety of others

♦ This appliance is not intended for use by persons 

(including children) with reduced physical, sensory 

or mental capabilities, or lack of experience and 

knowledge, unless they have been given supervision or 

instruction concerning use of the appliance by a person 

responsible for their safety. 

♦ Unpack all parts and lay them on a flat, stable surface

♦ Remove all packing materials and shipping devices, if

Labels on tool

The following pictograms along with the date code are 

shown on the tool:

Warning!

 To reduce the risk of injury, the user

must read the instruction manual.

Wear safety glasses or goggles.

Wear ear protection.

Wear a dust mask.

Wear gloves when handling blades.