Metabo SE 4000 620045000 - Инструкция по эксплуатации - Страница 9

ENGLISH

en

9

Original Instructions

We, being solely responsible, hereby declare that 
these screwdrivers, identified by type and serial 
number *1), meet all relevant requirements of 
directives *2) and standards *3). Technical 
documents for *4) - see page 3.

The tools are suitable for screwing into gypsum 
plasterboard on timber and metal substructures.
SE 4000 and SE 18 LTX 4000 are also suitable for 
gypsum fibre board up to 12.5 mm on metal 
substructures.
SE 2500 and SE 18 LTX 2500 are also suitable for 
gypsum fibre board up to 12.5 mm on metal and 
timber substructures and on lay plates.
The machines are not suitable for inserting and 
removing screws in metal materials.
The user bears sole responsibility for any damage 
caused by inappropriate use.
Generally accepted accident prevention 
regulations and the enclosed safety information 
must be observed.

For your own protection and for the 
protection of your power tool, pay 
attention to all parts of the text that are 
marked with this symbol!

WARNING

 – Reading the operating 

instructions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety 

warnings and instructions may result in electric 
shock, fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Pass on your power tool only together with these 
documents.

Mains powered machines: hold the power tool 

by the insulated gripping surfaces when 

performing an operation during which the 

cutting accessory may come into contact with 

hidden wiring or its own cord.

 A cutting 

accessory contacting a "live" wire may make 
exposed metal parts of the power tool "live" and 
could give the operator an electric shock.

Cordless machines: hold the power tool by the 

insulated gripping surfaces, when performing 

an operation during which the cutting 

accessory may contact hidden wiring.

 A cutting 

accessory contacting a "live" wire may make 

exposed metal parts of the power tool "live" and 
could give the operator an electric shock.
Ensure that the place where you wish to work is free 
of 

power cables, gas lines or water pipes

 (e.g. 

check using a metal detector).

Never use 25 mm long 

screwdriver 

bits (13) in the screwdriver spindle 
(15)! Removal is not possible! Only 
use the bit holder (14)!

Smaller workpieces must be secured in such a way 
that they are not carried along with the screwdriver 
bit (e.g. by clamping in a vice or on a work bench 
with screw clamps).
Keep hands away from the rotating tool! Remove 
chips and similar material only with the machine at 
a standstill.
Wear ear protectors when working for long periods 
of time. High noise levels over a prolonged period of 
time may affect your hearing.
Note that high counter-torques are possible during 
work. Always hold the machine firmly, adopt a 
steady stance and focus on your work.
Do not keep the ventilation slots closed.

Materials that generate dusts or vapours that may 
be harmful to health (e.g. asbestos) must not be 
processed.

4.1

Special safety instructions for mains 

powered machines:

Avoid inadvertent starts by always unlocking the 
switch when the plug is removed from the mains 
socket or whenever the power fails.
Pull the plug out of the socket before making any 
adjustments, changing tools, carrying out 
maintenance or cleaning.

4.2

Special safety instructions for cordless 

machines:

Avoid inadvertent starts by making sure that the 
machine is switched off before fitting the battery 
pack.
Remove the battery pack from the machine before 
making any adjustments, changing tools, 
maintaining or cleaning.

Protect battery packs from water and 
moisture!

Do not expose battery packs to fire!

Do not use faulty or deformed battery packs!
Do not open battery packs!
Do not touch contacts or short-circuit battery packs!

A slightly acidic, flammable fluid may leak 
from defective Li-ion battery packs! 

If battery fluid leaks out and comes into 
contact with your skin, rinse immediately 
with plenty of water. If battery fluid leaks out 

1. Declaration of Conformity

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions